X24-019PKC-U Digi International/Maxstream, X24-019PKC-U Datasheet - Page 30
![no-image](/images/no-image-200.jpg)
X24-019PKC-U
Manufacturer Part Number
X24-019PKC-U
Description
MODEM RF 2.4GHZ 19.2KBPS USB
Manufacturer
Digi International/Maxstream
Series
XStream™r
Specifications of X24-019PKC-U
Function
Transceiver, Modem
Modulation Or Protocol
FHSS
Frequency
2.4GHz ~ 2.4835GHz
Applications
General Purpose
Interface
USB
Sensitivity
-102dBm
Power - Output
17dBm (50mW)
Data Rate - Maximum
20 kbps
Voltage - Supply
5V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Appendix A: Agency Certifications
XStream‐PKG‐U™ USB RF Modem – Product Manual v4.2B5 [2006.02.27]
FCC Certification
FCC Notices
The XStream RF Modem complies with Part 15 of the FCC rules and regulations. Compliance with
the labeling requirements, FCC notices and antenna usage guidelines is required.
To fulfill the FCC Certification requirements, the OEM must comply with the following FCC
regulations:
1.
2.
IMPORTANT: The 9XStream (900 MHz) and 24XStream (2.4 GHz) RF Modems have been certified by
the FCC for use with other products without any further certification (as per FCC section 2.1091).
Changes or modifications not expressly approved by MaxStream could void the user’s authority to
operate the equipment.
IMPORTANT: OEMs must test their final product to comply with unintentional radiators (FCC section
15.107 and 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
IMPORTANT: The XStream RF Modems have been certified for remote and base radio applications. If
the XStream will be used for portable applications, the device must undergo SAR testing.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
© 2006 MaxStream, Inc. Confidential and Proprietary
•
•
•
•
The system integrator must ensure that the text on the external label provided with this
device is placed on the outside of the final product [Figure A-01 for 900 MHz operations or
Figure A-02 for 2.4 GHz operations].
The XStream RF Modem may be used only with Approved Antennas that have been tested
with this modem. [Refer to Tables A-01 (900 MHz) and A-02 (2.4 GHz)]
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
30