X4-Z11-W-A Digi International, X4-Z11-W-A Datasheet - Page 208

• Manufacturer Part Number: X4-Z11-W-A
• Description: PORT X4 ZIGBEE TO WIFI
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-Z11-W-A

• Function: Transceiver
• Modulation Or Protocol: DSSS
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45, RS-232, USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 6 V to 30 V
• Output Power: 1.5 W
• Antenna: 4 in Dipole with 2 ft Cable
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1155

Commands for managing XBee networks and nodes
Several commands are used to configure XBee networks and display information and statistics
about the devices in the network: set xbee, display xbee, xbee, and info zigbee_sockets.




The set xbee command configures XBee network settings for a ConnectPort X gateway.
Also displays current configuration parameters on the gateway xbee node or of remote
nodes in the xbee (specified by the address option).
The display xbee command refreshes the display of XBee network devices, and
displays specific information about XBee network devices. Information displayed
includes the node address and ID list, as well as individual node status.
The xbee command executes an XBee utility or displays the status of actions performed
by the XBee utilities. Actions include displaying information about the XBee network
setup, sending loopback data, displaying the status of XBee firmware, and scheduling
XBee firmware updates.
The info zigbee_sockets command displays statistics about XBee device sockets and
data communications activity on an XBee network. These statistics show what is
happening on the XBee network from the ConnectPort X gateway’s perspective;
essentially data from the XBee module’s perspective as interpreted by the XBee driver
in the gateway.
M o n i t o r a n d m a n a g e D i g i d e v i c e s
2 0 8