CN4490-1000-232-SP Laird Technologies, CN4490-1000-232-SP Datasheet - Page 30

• Manufacturer Part Number: CN4490-1000-232-SP
• Description: TXRX ETH-RS232 900MHZ 1W ANT&PS
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of CN4490-1000-232-SP

• Function: 2 Transceivers
• Modulation Or Protocol: FHSS, FSK
• Frequency: 902MHz ~ 928MHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Sensitivity: -99dBm
• Power - Output: 1000mW
• Data Rate - Maximum: 115.2kbps
• Features: 1 ConnexNet and 1 RS232 ConnexLink
• Voltage - Supply: 7 V ~ 18 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

11
12
13
14
15
16
17
18
19
20
21
22
At the prompt, type the following command: #set ip eth0 dhcp-client disable
Wait for an OK response.
At the prompt, type the following command: #set ip eth0 ip 10.16.202.81
Note: In this example, the desired static IP address is 10.16.202.81 and the correct IP should be
substituted as needed.
Wait for an OK response.
At the prompt, type the following command: #set bridge enable
Wait for an OK response.
At the prompt, type the following command: #set bridge ipmodule ip-address 10.16.202.81
Note: In this example, the desired static IP address is 10.16.202.81 and the correct IP should be
substituted as needed.
Wait for an OK response.
At the prompt, type the following command: #set ppp ppp0 enable
Wait for an OK response.
At the prompt, type the following command: #set ppp ppp0 raw-mode enable
Wait for an OK response.
www.aerocomm.com
D E V I C E S E T U P
2 5