MTCBA-C-N12 Multi-Tech Systems, MTCBA-C-N12 Datasheet - Page 5

MODEM CDMA 800/1900MHZ DC PWR IP

MTCBA-C-N12

Manufacturer Part Number
MTCBA-C-N12
Description
MODEM CDMA 800/1900MHZ DC PWR IP
Manufacturer
Multi-Tech Systems
Datasheets

Specifications of MTCBA-C-N12

Function
Transceiver, CDMA, Modem
Modulation Or Protocol
CDMA2000
Frequency
800MHz, 1.9GHz
Interface
RS-232
Data Rate - Maximum
153.6 kbps
Voltage - Supply
5 V ~ 32 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Power - Output
-
Applications
-
Sensitivity
-
Other names
881-1024
Safety
General Safety
The modem is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device is
physically secured at one location and is not able to be easily moved to another location. “Mobile” means that the
device is designed to be used in other than fixed locations.
RF Interference Issues
It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility
of radio frequency, RF, interference. Please follow the safety advice given below carefully.
Installation Instructions for Hazardous Locations
Vehicle Safety
Multi-Tech Systems, Inc. MultiModem CDMA Wireless Modem User Guide
1.
2.
3.
4.
5.
6.
Switch OFF your Wireless MultiModem when in an aircraft. The use of cellular telephones in an aircraft may
endanger the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this
instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or
both.
Switch OFF your Wireless MultiModem when around gasoline or diesel-fuel pumps and before filling your
vehicle with fuel.
Switch OFF your Wireless MultiModem in hospitals and any other place where medical equipment may be in
use.
Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations
are in progress.
There may be a hazard associated with the operation of your Wireless MultiModem close to inadequately
protected personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the
medical device to determine if it is adequately protected.
Operation of your Wireless MultiModem close to other electronic equipment may also cause interference if the
equipment is inadequately protected. Observe any warning signs and manufacturers’ recommendations.
Do not use your MultiModem while driving.
Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.
If incorrectly installed in a vehicle, the operation of Wireless MultiModem telephone could interfere with the
correct functioning of vehicle electronics. To avoid such problems, be sure that qualified personnel have
performed the installation. Verification of the protection of vehicle electronics should be part of the installation.
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Caution:
between the transmitter’s antenna and the body of the user or nearby persons. The Modem
is not designed for or intended to be used in portable applications within 20 cm. (8 inches) of
the body of the user.
The modems are open devices intended for installation in an ultimate enclosure suitable for the intended
application.
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, AND D OR NON-
HAZARDOUS LOCATIONS ONLY.
“WARNING – Explosion Hazard – Substitution of Components may Impair Suitability for Class I, Division 2”.
“WARNING – Explosion Hazard – Do not Disconnect Equipment Unless Power has been switched off or the
area is known to be Non-hazardous”.
“WARNING – Explosion Hazard – Do not replace fuse unless power has been switched off or the area is
known to be non-hazardous”
“WARNING – Do not install or remove SIM card unless power has been switched off or the area is known to
be non-hazardous”.
Maintain a separation distance of at least 20 cm (8 inches) is normally maintained
Chapter 1 – Product Description and Specifications
5

Related parts for MTCBA-C-N12