UPB1007K-E1-A CEL, UPB1007K-E1-A Datasheet - Page 25

• Manufacturer Part Number: UPB1007K-E1-A
• Description: IC DOWNCONVERT DL 3V 36-QFN
• Manufacturer: CEL
• Series: UPB1007Kr
• Type: RF IC'sr

Specifications of UPB1007K-E1-A

• Rf Type: GPS
• Frequency: 1575.42MHz
• Number Of Mixers: 2
• Gain: 15.5dB
• Noise Figure: 3.2dB
• Secondary Attributes: Down Converter
• Current - Supply: 35mA
• Voltage - Supply: 2.7 V ~ 3.3 V
• Package / Case: 36-QFN
• Operating Frequency: 1636.8 MHz
• Supply Current: 0.6 mA
• Operating Temperature Range: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NOTES ON CORRECT USE
RECOMMENDED SOLDERING CONDITIONS
methods and conditions other than those recommended below, contact your nearby sales office.
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent abnormal oscillation).
(3) Keep the wiring length of the ground pins as short as possible.
(4) Connect a bypass capacitor (example: 1 000 pF) to the V
(5) High-frequency signal I/O pins must be coupled with the external circuit using a coupling capacitor.
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PU10014EJ02V0DS
Soldering Conditions
CC
pin.
: 260°C or below
: 120±30 seconds
: 215°C or below
: 30 to 60 seconds
: 260°C or below
: 1 time
: 350°C or below
: 3 seconds or less
: 10 seconds or less
: 60 seconds or less
: 3 times
: 0.2%(Wt.) or below
: 25 to 40 seconds
: 3 times
: 0.2%(Wt.) or below
: 10 seconds or less
: 0.2%(Wt.) or below
: 0.2%(Wt.) or below
Condition Symbol
WS260
VP215
HS350
For soldering
IR260
µ
PB1007K
25