WL-TRANSCVR-RD Silicon Laboratories Inc, WL-TRANSCVR-RD Datasheet
WL-TRANSCVR-RD
Specifications of WL-TRANSCVR-RD
Related parts for WL-TRANSCVR-RD
WL-TRANSCVR-RD Summary of contents
Page 1
... Note: This design operates the RF transceiver at 908 MHz. This frequency can be modified in firmware. Silicon Labs’ USB debug adapter and software tools are required to recompile the code and reprogram the boards. Figure 1. Wireless Voice Transceiver Board Rev. 0.1 11/ Copyright © 2005 by Silicon Laboratories WL-TRANSCVR- WL-TRANSCVR- ...
Page 2
... WL-TRANSCVR-RD 3. Wireless Voice Transceiver Reference Design Demonstration The following steps are necessary to assemble and demonstrate the operation of this reference design: 1. Screw-in the provided antennas to the wireless voice transceiver boards. Do not over-tighten. 2. Plug in the headset microphone connector (pink color) to the board socket labeled “Mic”. Plug in the headset headphone connector (green color) to the board socket labeled “ ...
Page 3
... The USB debug adapter can be used with the Silicon Laboratories Integrated Development Environment (IDE) to program and debug the transceiver boards. The Silicon Labs IDE and other software tools can be downloaded from the following link: http://www.silabs.com/products/microcontroller/downloads.asp WL-TRANSCVR-RD Rev. 0.1 3 ...
Page 4
... WL-TRANSCVR-RD Contact Information Silicon Laboratories Inc. 4635 Boston Lane Austin, TX 78735 Email: MCUinfo@silabs.com Internet: www.silabs.com The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the use of information included herein ...