CC-EVB-900W Copeland Communications Inc, CC-EVB-900W Datasheet - Page 9

no-image

CC-EVB-900W

Manufacturer Part Number
CC-EVB-900W
Description
KIT EVAL SOCKET RADIO
Manufacturer
Copeland Communications Inc
Series
Socket Radio™r
Type
Wireless Modemr
Datasheet

Specifications of CC-EVB-900W

Frequency
915MHz
For Use With/related Products
CC-900W
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
539-1030
STEP 8: Set the parameters for the serial port as shown below. The Radios default to 19200 baud on reset. Set flow control to
“Hardware” (RTS/CTS).
Connecting to another Radio
Step 1: Determine or set the ID of both nodes. To determine the ID of the local Radio, use the
Step 2: Set the channels on both Radios so they match:
Step 3: Dial the other modem using the ATDT command
To set the ID:
The ID command is set in flash and is stored permanently until changed by the user. These ID’s are treated like phone
numbers and must be unique to a single modem.
at.cl=00 (set group ID)
Atdt000002
If the command is successful, you will get “CONNECT” as the response.
at.id?
at.id=000002 (this must be exactly 6 hexidecimal characters long)
Wireless Modem Evaluation Board User’s Guide
Internet: www.copelandcommunications.com
© 2005 Copeland Communications, Inc.
Subject to technical changes
Figure 9

Related parts for CC-EVB-900W