DR7003-DK RFM, DR7003-DK Datasheet - Page 12

• Manufacturer Part Number: DR7003-DK
• Description: 3G DEVELOPMENT KIT 303.825 MHZ
• Manufacturer: RFM
• Type: Transceiverr

Specifications of DR7003-DK

• Frequency: 303.825MHz
• For Use With/related Products: DR7003
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 583-1047

RF Monolithics, Inc.
Refer to the individual device datasheets for a detailed explanation on each bit function.
The development boards are equipped to perform range testing, providing a benchmark for
performance in different environments. When Range Test is initiated, the board will begin
transmitting a predefined data packet. The opposite board need only be programmed for Receive
Mode.
To activate the Range Test install a shorting jumper on to J5 prior to switching SW1 ON. When
using J5 to enable the Range Test the board will begin transmission immediately after power-up.
To disable Range Test, switch SW1 to OFF, remove jumper, switch SW1 back to ON to power the
board.
Refer to the 3G VWO User’s Guide for a detailed discussion of the Range Test hardware function.
The configuration software has a built-in terminal program that can be used to view RF traffic
between the two boards. The terminal has a separate Transmit and Receive window.
Rev 1.1
1.8
1.9 Software Terminal
RANGE TEST
Configuration
[phone] toll-free in U.S. and Canada
www.rfm.com
Email: [e-mail]
12