CY4636B Cypress Semiconductor Corp, CY4636B Datasheet - Page 2

• Manufacturer Part Number: CY4636B
• Description: KIT WIRELESS USB LP FOR CYRF6936
• Manufacturer: Cypress Semiconductor Corp
• Series: WirelessUSB™r
• Type: WirelessUSBr

Specifications of CY4636B

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: CY4636B
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Connecting the Bridge, Keyboard, and Mouse
Install batteries into the keyboard and mouse. On the mouse, note that both batteries are aligned in the same direction with the
negative end inserted first. Also on the mouse, ensure that the power switch is in the ON position.
Carefully plug the bridge into your PC. Your PC automatically recognizes the device and installs drivers for USB HID devices
(keyboard and mouse). The red LED on the bridge illuminates during the enumeration process and then extinguishes after the
enumeration process is complete. If the Bind button is inadvertently pushed while you are plugging the bridge into the USB port,
the red LED blinks. You must remove the bridge from the computer and re-insert it into the USB port making sure that the Bind
button is not pushed.
After the bridge is enumerated and the red LED is off, press the Bind button on the bridge and the Bind button on the keyboard
to complete the ‘binding’ process. While in the bind mode, the red LED blinks until the Bind button is pushed on the keyboard.
The bridge LED stops blinking to indicate the keyboard is now ready for normal operation.
Repeat the above process for the mouse. Press the Bind button on the bridge then press the mouse Bind button.
Both the keyboard and mouse must be bound to the bridge. Any activity on either device causes the green LED to illuminate
momentarily. The bind process may be repeated at any time if one of the devices failed to bind.
WirelessUSB LP Keyboard/Mouse RDK CD-ROM
The CD-ROM contains electronic versions of the documents, the hardware design files for the PCBs (Gerbers, BOMs, schematics
and Orcad files), battery level and signal strength application, and the source code and binary files for the bridge, keyboard and
mouse.
Directory Structure
The following list describes the higher-level directory structures and does not completely explore the lower level directories or
attempts to describe the location of every file.
|-- Docs
|
|-- Hardware
|
|
|
|
|-- Firmware
|
|
|
|
|
|
|
|
|
|-- Software
|
|
|
|
|
|-- Bridge
|-- Keyboard
|-- Mouse
|-- Source Code
|-- Binaries
|-- Source Code
|-- Binaries
|
|-- PSoC Tools
|-- Keyboard
|-- Bridge
|-- Mouse
|-- Standard
|-- Encrypt
|-- EMC_Test
‘Docs’ contains the kit documentation in PDF form.
‘Hardware’ contains the design files used in development of the boards in
the kit. There are subdirectories for each board. Within those directories
you will find .pdf schematics, Bill of Materials, Orcad source files, and
Gerber databases.
‘Firmware’ contains the firmware related files.
‘Source Code’ contains the source files for each of the RDK boards. The
‘Keyboard’, ‘Mouse’ and ‘Bridge’ directories include the application source
files and the necessary PSoC Designer directories/files.
‘Binaries’ contains a binary image of the firmware for each RDK board.
‘Standard’ contains the binary image without encryption and ‘Encrypt’
contains the binary image with encryption. ‘EMC_Test’ contains the
binary image for the EMC test.
strength application source files and executable(s).
‘PSoC tools’ contains the PSoC tools for building the firmware and
programming the parts..
‘Source Code’ and ‘Binaries’ contains the battery level and signal
Documentation Index
A brief description of the documents follows:
CY4636 Reference Design Kit Quick Start
Description: Introduction to the development kit contents (this document).
Cypress Software License Agreement
Description: This document provides the standard Cypress license for use of materials supplied in the development kit.
CY4636 Reference Design Kit Release Notes
Description: This Release Notes document focuses explicitly on the development kit materials. It covers any last minute
information that relates to deviations from functionality explained in the documentation.
CY4636 Reference Design Kit Errata
Description: This document covers any known RDK errata.
CY4636 RDK User's Guide
Description: This is a detailed reference that describes the RDK.
LP Radio Driver Documention.doc
Description: This is a detailed reference that describes the LP Radio Driver.
CY7C63803 enCoRe II Low Speed USB Data sheet
Description: This is the data sheet for the CY7C63310/CY7C638xx/CY7C639xx enCoRe™ II Low-Speed USB Peripheral
Controller.
CY7C60123 enCoRe II LV Data sheet
Description: This is the data sheet for the CY7C601xx/CY7C602xx enCoRe™ II LV Microcontroller devices.
CY7C60323 enCoRe III LV Data sheet
Description: This is the data sheet for the CY7C603xx enCoRe™ II LV Microcontroller devices.
CYRF6936 WirelessUSB LP Data sheet
Description: Data sheet for the WirelessUSB LP Radio. Please check our web site for any updates. Go to
look under ‘WirelessUSB’.
Avago ADNS-3040 Ultra Low-Power Mouse Sensor Data sheet
Description: This is the data sheet for the Avago ADNS-3040 Ultra Low-Power Mouse Sensor.
Development Tools
The enCoRe™ III LV, enCoRe™ II LV and enCoRe™ II development tools are provided in this kit. Check the Cypress website
www.cypress.com
configuration: PSoC Designer 4.3, PSoC Designer Service Pack 1, and PSoC Programmer 2.20.0.11. Make sure you have this
version or a newer one.
for availability of update. The mouse, keyboard and bridge firmware was built using the following application
www.cypress.com
and