ATASTK512-EK2-AUT Atmel, ATASTK512-EK2-AUT Datasheet - Page 7

• Manufacturer Part Number: ATASTK512-EK2-AUT
• Description: KIT STARTER RF UNIDIRECT 433MHZ
• Manufacturer: Atmel
• Type: Transmitter, Receiverr

Specifications of ATASTK512-EK2-AUT

• Frequency: 433MHz
• For Use With/related Products: Atmel STK®500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5170C–AVR–10/09
Getting Started
2-2
1. Carefully remove any ICs in the green “SCKT3200A2” socket.
2. Insert the furnished ATMega88 into the “SCKT3200A2” socket.
Note:
3. Using a 6-pin jumper cable supplied with the STK500;
4. Using a 10-pin jumper cable supplied with the STK500;
5. Using a 10-pin jumper cable supplied with the STK500;
6. Place jumpers on the following headers as shown in
Figure 2-2.
connect the two male headers “ISP6PIN” and “SPROG2”.
connect the two male headers “PORTC” and “LEDS”.
connect the two male headers “PORTD” and “SWITCHES”.
– VTARGET
– AREF
– RESET
– XTAL1
– OSCEL (a 3-pin header. Place a jumper next to the “1” printed on the board).
The orientation of the red stripe in the cable is not critical in the following steps as long as pin 1 is con-
nected to pin 1.
Detail of Jumper Placement on the STK500
Figure
2-2.
STK512 User Guide