ATASTK512-EK1-IND Atmel, ATASTK512-EK1-IND Datasheet - Page 12

• Manufacturer Part Number: ATASTK512-EK1-IND
• Description: KIT EVAL RF UNIDIRECT 315MHZ
• Manufacturer: Atmel
• Type: Transmitter, Receiverr

Specifications of ATASTK512-EK1-IND

• Frequency: 315MHz
• For Use With/related Products: Atmel STK®500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.2.2
STK512 User Guide
Programming the Transmitter(s)
1. On the STK500, remove the 6-pin cable from the “SPROG2” header, plug it into the ISP program-
Figure 2-6.
2. On the “Program” tab of the “STK500” pop-up window, select the ATtiny44 from the pull-down list.
3. In the “Advanced” tab select “read signature” to ensure that communication with the device is func-
4. Select the “fuses” tab and ensure that the Fuses are set as shown in
Table 2-2. Transmitter ATtiny44 Fuse Settings
5. From the CD, in the folder “software\IAR\TX\Release\Exe,” program the flash of the ATtiny45 with
6. From the CD, in the folder “software\Precompiled,” program the EEPROM of the Tiny45 with
7. Repeat this process for the second transmitter, except with the file “TX_EEPROM_AES128_ID2.”
The transmitters are now programmed and ready for use.
Fuse Name
Preserve EEPROM memory…
Brown-out detection disabled
Int RC Osc 8 MHz: … +64 ms
Divide clock by 8 internally
Watchdog Timer always on
ming adapter. Next, insert the transmitter application board into the adapter, as shown in
tioning properly. If the read attempt is successful, a number will show in the window. If not, a pop-up
will appear, describing the failure. Consult the STK500 documentation to handle any failures.
“TX.a90.”
“TX_EEPROM_AES128_ID1.”
Transmitter Key Fob with 6-pin Cable
Table
Not Checked
Not checked
Checked
Checked
Checked
2-2.
Setting
Getting Started
5170C–AVR–10/09
Figure
2-6.
2-7