ATAB5429-9-WB Atmel, ATAB5429-9-WB Datasheet - Page 49
![KIT DEMO 915MHZ BLACKBIRD](/photos/14/12/141244/atab5429-9-wb_sml.jpg)
ATAB5429-9-WB
Manufacturer Part Number
ATAB5429-9-WB
Description
KIT DEMO 915MHZ BLACKBIRD
Manufacturer
Atmel
Type
Transceiver, UHFr
Specifications of ATAB5429-9-WB
Frequency
915MHz
Maximum Frequency
915 MHz
Output Power
0 dBm to 10 dBm
Supply Voltage (max)
6 V
Supply Voltage (min)
3 V
Supply Current
21 mA
Maximum Operating Temperature
+ 85 C
Board Size
2 in x 3.5 in
Minimum Operating Temperature
- 40 C
Product
RF Modules
For Use With/related Products
ATA5429
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
ATAB-5429-9-WB
ATAB-5429-9-WB
ATAB-5429-9-WB
8. Transceiver Configuration
8.1
Figure 8-1.
8.2
Figure 8-2.
8.3
Figure 8-3.
4841D–WIRE–10/07
Command: Read TX/RX Data Buffer
Command: Write TX/RX Data Buffer
Command: Read Control/Status Register
SDO_TMDO
SDO_TMDO
SDO_TMDO
SDI_TMDI
SDI_TMDI
SDI_TMDI
Read TX/RX Data Buffer
Write TX/RX Data Buffer
Read Control/Status Register
SCK
SCK
SCK
CS
CS
CS
Command: Read TX/RX Data Buffer
Command: Write TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
MSB
MSB
MSB
Command: Read C/S Register X
The configuration of the transceiver takes place via a 4-wire serial interface (CS, SCK,
SDI_TMDI, SDO_TMDO) and is organized in 8-bit units. The configuration is initiated with an
8-bit command. While shifting the command into pin SDI_TMDI, the number of bytes in the
TX/RX data buffer are available on pin SDO_TMDO. The read and write commands are followed
by one or more 8-bit data units. Each 8-bit data transmission begins with the MSB. The serial
interface is in the reset state if the level on pin CS = Low.
During a RX operation, the user can read the received bytes in the TX/RX data buffer
successively.
During a TX operation the user can write the bytes in the TX/RX data buffer successively. An
echo of the command and the TX data bytes are provided for the microcontroller on pin
SDO_TMDO.
The control and status registers can be read individually or successively.
LSB
LSB
LSB
ATA5423/ATA5425/ATA5428/ATA5429
MSB
MSB
MSB
Command: Read C/S Register Y
Write TX/RX Data Buffer
Data C/S Register X
RX Data Byte 1
TX Data Byte 1
X
LSB
LSB
LSB
MSB
MSB
MSB
Command: Read C/S Register Z
Data C/S Register Y
RX Data Byte 1
TX Data Byte 2
TX Data Byte 1
X
LSB
LSB
LSB
49