ACC-CONSMAM3120-U Sigma Designs Inc, ACC-CONSMAM3120-U Datasheet - Page 8
![MOD Z-WAVE PCB WHIP US 3120C-EW](/photos/14/8/140877/370100800__604020504_board2__604021504_board2_sml.jpg)
ACC-CONSMAM3120-U
Manufacturer Part Number
ACC-CONSMAM3120-U
Description
MOD Z-WAVE PCB WHIP US 3120C-EW
Manufacturer
Sigma Designs Inc
Series
Z-WAVEr
Type
Transceiver, Z-Waver
Datasheet
1.370100860.pdf
(17 pages)
Specifications of ACC-CONSMAM3120-U
Frequency
908.42MHz
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
370100800
703-1025
703-1025
INS10027-6
Explanation of the ZW0301 based Z-Wave Module naming.
Refer to Appendix A for a description of the 100 series Z-Wave modules naming.
3.3
The above module configurations are based on Blueprints available from Zensys. Other configurations
are of course possible by changing the BOM’s to represent your needs
Note: additional mounting options such as Push Button and External On-board Reset Device, On-board
Voltage Regulator” and Zerox and ADC signal 5V-to-3.3V level conversion” (see Table 1) are not
specified as part of the module name but should be specified separately.
3.3.1
The following Z-Wave Modules are based on the ZW0201 or ZW0301 Single Chips.
3.3.1.1
The ZM2102 is the 2cm
in order to operate as a Z-Wave Slave node. The ZM2102 is designed to be supplied as a “component”,
optionally with a top shield. The module, both with and without the top shield, can be mounted with a
standard pick-and-place SMT machine. The electrical interface pads are designed as castellation
notches.
3.3.1.2
The ZM3102N is the 2cm
mounted in order to operate as a Z-Wave Slave node. The ZM3102N is designed to be supplied as a
“component”, optionally with a top shield. The module, both with and without the top shield, can be
mounted with a standard pick-and-place SMT machine. The electrical interface pads are designed as
castellation notches.
Zensys A/S
Available Z-Wave Module Configurations
ZW0201 / ZW0301 Based Z-Wave Modules
ZM2102 Z-Wave Module
ZM3102N Z-Wave Module
Frequency:
EU = 868.42MHz
US = 908.42MHz
HK = 919.82MHz
ANZ = 921.42MHz
Z-Wave
Module
2
Z-Wave Module based on ZW0201 having the necessary components mounted
2
US Z M 31 20 NC – EW
Z-Wave Module based on ZW0301 having the necessary components
Figure 2 ZW0301 Z-Wave Module Naming
ZW0301 Single Chip
Z-Wave Module Selection Guideline
Z-Wave Modules
Whip antenna
EEPROM mounted
Converter Module
Notches (Castellation notches)
Only applicable for size 2cm
Module Size:
20 = 20cm
06 = 6cm
02 = 2cm
2
2
2
PCB
PCB
PCB
2
Page 5 of 14
2007-03-16