DR-TRC105-434-DK RFM, DR-TRC105-434-DK Datasheet - Page 11

• Manufacturer Part Number: DR-TRC105-434-DK
• Description: DEV KIT TRC105
• Manufacturer: RFM
• Type: Transceiverr

Specifications of DR-TRC105-434-DK

• Frequency: 418MHz ~ 434.79MHz
• Product: RF Development Tools
• Maximum Frequency: 434.79 MHz
• Output Power: 10 dBm
• Antenna: SMA
• Supply Voltage (max): 12 V
• Minimum Frequency: 418 MHz
• Supply Voltage (min): 4.5 V
• For Use With/related Products: TRC105
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 583-1157

Figure 11 - DR-TRC105 Radio Board TX Power Adjustment
Two AA battery packs are supplied in the development kit to power the radio boards
when they are removed from the interface boards, as shown in Figure 12. Alternately, a
regulated power supply in the range of 2.7 to 3.6 volts can be used to power the radio
boards. Note - there are no voltage regulators on the radio boards. Applying a voltage
outside the specified power supply range can damage the boards. Do not attempt to
power a radio board directly through its battery connector using one of the 4.5 volt wall-
plug power supplies. The 4.5 volt power supplies are used to power the development kit
interface boards, which in turn provide regulated 3 volts to the radio boards. The AA
battery packs should only be used to power stand alone radio boards. They do not
provide enough voltage to reliably power the interface boards. Do not attempt to power
a radio board through its battery connector when it is plugged into an interface board.
Figure 12 - Powering the Stand-alone Radio Boards
www.RFM.com
Technical support +1.800.704.6079
Page 11 of 27
©2009-2010 by RF Monolithics, Inc.
E-mail:
[e-mail]
DR-TRC105-DK - 04/05/10