DVK-PRM110 Laird Technologies, DVK-PRM110 Datasheet - Page 40
![KIT DEVELOPMENT FOR LT2510 U.FL](/photos/14/10/141008/dvk-prm110_sml.jpg)
DVK-PRM110
Manufacturer Part Number
DVK-PRM110
Description
KIT DEVELOPMENT FOR LT2510 U.FL
Manufacturer
Laird Technologies
Series
FlexRF™r
Type
Transceiver, FHSSr
Specifications of DVK-PRM110
Frequency
2.4GHz
Output Power
100 mW
Antenna
U.FL Coaxial
Silicon Manufacturer
Laird Technologies
Kit Application Type
Communication & Networking
Application Sub Type
RF Module
Kit Contents
2x RF Module, 2x Adapter Board, CD, 2x AC Power Adapters, 2x DB9
Rohs Compliant
Yes
For Use With/related Products
PRM110
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
SDK-T100S1UX
SDK-T100S1UX
SDK-T100S1UX
LT2510
Wireless Module
API OPERATION
37 www.lairdtech.com
API RECEIVE PACKET
By default, the source MAC is not included in the received data string sent to the OEM Host. For applications where
multiple radios are sending data, it may be necessary to determine the origin of a specific data packet. When API
Receive Packet is enabled, all packets received by the transceiver will include the MAC address of the source radio
as well as an RSSI indicator which can be used to determine the link quality between the two.
API Receive Packet is enabled when bit-0 of the API Control (Address 0xC1) byte is enabled. Upon receiving a RF
packet, the radio sends its OEM Host the data as shown in Figure 2 below.
FIGURE 2: RECEIVE API PACKET FORMAT
API TRANSMIT PACKET
API Transmit Packet is a powerful API Mode that allows the OEM Host to send data to a single or multiple (via
Broadcast) transceivers on a packet-by-packet basis. This can be useful for many applications; including polling
networks and mesh networks.
API Transmit Packet is enabled when bit-1 of the API Control (address 0xC1) byte is enabled. The OEM should
pre-pend each packet of data with the following header information.
FIGURE 3: TRANSMIT API PACKET FORMAT
1
Setting the Destination Address to 0xFF 0xFF 0xFF will broadcast the packet to all available
transceivers in the network.
1
Laird Technologies