CB-OEMSPA311I-01 ConnectBlue, CB-OEMSPA311I-01 Datasheet - Page 39
![KIT STARTER OEM SRL 311I RS232](/photos/14/9/140959/cb-oemspa311i-01_sml.jpg)
CB-OEMSPA311I-01
Manufacturer Part Number
CB-OEMSPA311I-01
Description
KIT STARTER OEM SRL 311I RS232
Manufacturer
ConnectBlue
Series
OEM Serial Port Adapter™r
Type
Bluetoothr
Datasheet
1.CB-OEMSPA311I-01.pdf
(60 pages)
Specifications of CB-OEMSPA311I-01
Frequency
2.4GHz
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
809-1006
9.2 Link Layer Commands
AT*AGAM Authentication Mode
4011
4012
4013
4014
5000
5001
5002
5003
Syntax
AT*AGAM=<amode>,<store><CR>
AT*AGAM?
Parameters
amode
LLDP information level. The levels are additive. I.e. level 2 include level 0 and 1 as well as
level 2.
0…3 (default 3)
0 = Send macaddress and ip-address
1 = Send system name (user defined hostname), system description (version information) and
announce station capability.
2 = Send services (Announce tcp listener and udp receiver ip and port).
3 = Send peer information (information regarding the currently connected peers).
RSSI threshold value for activation of background scans. When associated access point signal
strength drops below specified value the system starts to do backgrounds scans. Roaming is
done if another access point with better signal strength is found.
38…113 (default 58. 0dBm is 128. 58 – 128 = –70dBm)
LED scheme (reserved)
Enable UART fallback mode. As long as switch 0 is pressed/activated UART settings are tem-
porarily changed to 57600 baud, 8n1, and hardware flow control. Settings are restored when
button is released.
If fallback mode is enabled, switch 0 status is sampled every second. Thus, switch 0 has to be
activated in average for more than 1 second to
0 = off (default)
1 = on
Turn on/off TCP keepalive packets. It is important to understand that sending frequent
keepalive packets usually isn’t a good solution to detect dropped connections. Detecting dead
links should be done on a higher level, i.e. in the user application protocol. There is a lot of
information available on the subject on the web.
0 = TCP keepalive packets turned off (default)
1 = TCP keepalive packets turned on
Time in milliseconds for a TCP connection to be idle before a keepalive packet is sent.
0…2147483647 (default 7200000 = 2 hours)
Time in milliseconds between keepalive packets after a keepalive packet has been lost.
0…2147483647 (default 75000 = 75 seconds)
Number of lost keepalive packets to wait before a TCP connection is resetted.
1…255 (default 9)
Type
Integer
Description
0 = Open (default)
1 = Shared secret
Description
Write authentication mode.
Read authentication mode
Version 1.6.6 - 2009-11
39