ATR0610-EK1 Atmel, ATR0610-EK1 Datasheet - Page 68

• Manufacturer Part Number: ATR0610-EK1
• Description: BOARD DEMO PERFORMANCE GPS-LNA
• Manufacturer: Atmel
• Type: GPSr

Specifications of ATR0610-EK1

• Frequency: 1.575GHz
• For Use With/related Products: ATR0610
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

R
MAX-Link™ – WiMAX Solutions
Z-Link
Note:
Part Number
AT86RF535B
AT86RF525B
AT86RF540C
Evaluation Kits
Evaluation Kits are Available for Pre-qualified Customers
Part Number
AT86RF230
Evaluation Kits
Evaluation Kits are Available for Pre-qualified Customers
ADIO
1.
®
F
– 802.15.4/ZigBee™ Solutions
Additional Z-Link products can be found in the
REQUENCY
January 2008
Description
3.5 GHz Low-IF Conversion Transceiver for WiMAX Applications; Zero-IF is Supported with
Control from Baseband. Frequency Range 3.3 - 3.8 GHz; Supports 3.5 MHz, 5 MHz, 7 MHz,
8.75 MHz, and 10 MHz Channel Bandwidths with Modulation Up to 64QAM at Sensitivity
< -69 dBm. Requires no External Filters and Combines LNA, PA Driver, Rx/Tx Mixer, Rx/Tx
Filters, VCO, Synthesizer, Rx Gain Control, and Tx Power Control, All Fully Digital Controlled
and Residing in a 56-lead QFN Package
2.5 GHz Low-IF Conversion Transceiver for WiMAX Applications; Zero-IF is Supported with
Control from Baseband. Frequency Range 2.3 - 2.7 GHz; Supports 3.5 MHz, 5 MHz, 7 MHz,
8.75 MHz, and 10 MHz Channel Bandwidths with Modulation Up to 64QAM at Sensitivity
< -69 dBm. Requires no External Filters and Combines LNA, PA Driver, Rx/Tx Mixer, Rx/Tx
Filters, VCO, Synthesizer, Rx Gain Control, and Tx Power Control, All Fully Digital Controlled
and Residing in a 56-lead QFN Package
A Fully Integrated, Low-cost RF Dual Band (2.5 and 3.5 GHz) Low-IF/Zero-IF Conversion
Transceiver for WiMAX Applications. It Combines Excellent RF Performance at Smallest
Size and Current Consumption. The AT86RF540C Chip is Fabricated on the Advanced SiGe
BiCMOS Process AT46700. The Transceiver Combines LNA, PA Driver, Rx/Tx Mixer, Rx/Tx
Filters, VCO, Synthesizer, Rx Gain Control, and Tx Power Control, All Fully Digital Controlled.
The Number of Necessary External Devices is Limited to Only a Few Devices.
Description
Fully Integrated, Low-power 2.4 GHz Transceiver Designed for Low-cost IEEE 802.15.4-based
as Well as Wireless Networks Application, Including ZigBee; Receive Sensitivity Better
than -101dBm, Programmable Transmit Power Up to +3 dBm, Integrated Crystal Oscillator,
LNA, Tx/Rx Switch, PLL-loop Filter; Automatic VCO & Filter Calibration, SPI Interface; Offering
Easy System Design in Approach; Residing in a 32 Low Profile, Lead-free QFN Package
(RF) IC
S
(C
“Z-Link (ZigBee) AVR” section on page
ONTINUED
)
10.
www.atmel.com
Compliance
Compliance
RoHS
RoHS
Yes
Yes
Yes
Yes
Contact Atmel
Contact Atmel
for Availability
for Availability
Availability
Availability
June 2008
Now
Now
Now
61