0600-00029 Laird Technologies, 0600-00029 Datasheet - Page 6

• Manufacturer Part Number: 0600-00029
• Description: ANTENNA 915MHZ 1/2WAVE 6" RPSMA
• Manufacturer: Laird Technologies

Specifications of 0600-00029

• Antenna Type: Whip: 1/2 Wave, Fixed
• Number Of Bands: 1
• Frequency: 902MHz ~ 928MHz
• Vswr: 2
• Gain: 2.5dBi
• Termination: RP-SMA
• Mounting Type: Connector
• Height (max): 6.8" (173.5mm)
• Dimensions: 6 in L
• Technology Type: 1/2 Wave Wireless Transceiver Antenna
• Termination Style: RPSMA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

AC4790 Transceiver Module
AC4790 Features
OVERVIEW
The AC4790 is a member of AeroComm’s ConnexRF OEM transceiver family. The AC4790 is a cost effective, high
performance, frequency hopping spread spectrum transceiver; designed for integration into OEM systems operating
under FCC part 15.247 regulations for the 900 MHz ISM band.
AC4790 transceivers operate in a Masterless architecture. The unique feature of this architecture is its dynamic Session
extension and Collision Avoidance mechanism, which uses a proprietary scoring system to promote contention free
communication and ensure that each node has fair access to the network. This instinctive dynamic peer-to-peer
networking architecture enables several transceiver pairs to carry on simultaneous conversations on the same network.
To boost data integrity and security, the AC4790 uses AeroComm’s field-proven FHSS technology featuring optional
Data-Encryption Standards (DES). Fully transparent, these transceivers operate seamlessly in serial cable replacement
applications. Communications include both system and configuration data via an asynchronous TTL or optional RS-485
serial interface for OEM Host communications.
parameters can be changed on the fly.
transmission/reception is performed by the transceiver.
This document contains information about the hardware and software interface between an AeroComm AC4790
transceiver and an OEM Host.
configuration information and mechanical drawings. The OEM is responsible for ensuring the final product meets all
appropriate regulatory agency requirements listed herein before selling any product.
Note: Unless mentioned specifically by name, the AC4790 modules will be referred to as the “radio” or “transceiver”.
Individual naming is used to differentiate product specific features. The host (PC/Microcontroller/Any device to which the
AC4790 module is connected) will be referred to as “OEM Host”.
Networking and Security
Easy to Use
The compact AC4790 900MHz transceiver can replace miles of cable in harsh industrial
environments. Using field-proven FHSS technology which needs no additional FCC
licensing in the Americas, OEMs can easily make existing systems wireless with little or no
RF expertise.
Masterless: True peer-to-peer, point-to-multipoint, point-to-point
Retries and Acknowledgements
API Commands to control packet routing and acknowledgement on a packet-by-packet basis
Frequency Hopping Spread Spectrum for security and interference rejection
Customizable RF Channel number and system ID
Dynamic link analysis, remote radio discovery
Software controlled sensitivity
Hardware Protocol Status monitoring
Two generic input and output digital lines and integrated ADC functions
Continuous 76.8 kbps RF data stream
Software selectable interface baud rates from 1200 bps to 115.2 kbps
Low cost, low power and small size ideal for high volume, portable and battery powered applications
All modules are qualified for Industrial temperatures (-40°C to 80°C)
Advanced configuration available using AT commands
Information includes the theory of operation, specifications, interface definition,
All frequency hopping, synchronization, and RF system data
Configuration data is stored in an on-board EEPROM and most
6