A24-HASM-450 Digi International/Maxstream, A24-HASM-450 Datasheet - Page 6

• Manufacturer Part Number: A24-HASM-450
• Description: ANT 2.4GHZ DIPOLE HALF-WAVE
• Manufacturer: Digi International/Maxstream
• Series: XPressr

Specifications of A24-HASM-450

• Antenna Type: Whip: 1/2 Wave, Swivel, Tilt (Right Angle)
• Number Of Bands: 1
• Frequency: 2.4GHz
• Vswr: 2
• Gain: 2.1dBi
• Termination: RP-SMA
• Mounting Type: Connector
• Height (max): 4.35" (110.5mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 70000340; Q2724499B

XBee Series 2 OEM RF Modules ‐ ZigBee ‐ v1.x1x [2007.06.01]
Figure 1‐01. Mechanical drawings of the XBee Series 2 OEM RF Modules (antenna options not shown)
1.3. Mechanical Drawings
1.4. Mounting Considerations
.
The XBee Series 2 RF Module (through-hole) was designed to mount into a receptacle (socket) and
therefore does not require any soldering when mounting it to a board. The XBee Series 2
Development Kits contain RS-232 and USB interface boards which use two 20-pin receptacles to
receive modules.
Figure 1‐02. XBee Series 2 Module Mounting to an RS‐232 Interface Board.
The receptacles used on MaxStream development boards are manufactured by Century
Interconnect. Several other manufacturers provide comparable mounting solutions; however,
MaxStream currently uses the following receptacles:
MaxStream also recommends printing an outline of the module on the board to indicate the
orientation the module should be mounted.
© 2007 Digi International, Inc.
• Through-hole single-row receptacles -
• Surface-mount double-row receptacles -
• Surface-mount single-row receptacles -
Samtec P/N: MMS-110-01-L-SV (or equivalent)
Century Interconnect P/N: CPRMSL20-D-0-1 (or equivalent)
Samtec P/N: SMM-110-02-SM-S
Chapter 1 ‐ XBee Series 2 OEM RF Modules
XBee
6