SGA-3363 Sirenza Microdevices Inc, SGA-3363 Datasheet - Page 4

• Manufacturer Part Number: SGA-3363
• Description: IC AMP HBT SIGE 5500MHZ SOT-363
• Manufacturer: Sirenza Microdevices Inc

Specifications of SGA-3363

• Current - Supply: 31mA ~ 39mA
• Frequency: 0Hz ~ 5.5GHz
• Gain: 15.9dB
• Noise Figure: 3.5dB
• P1db: 10.5dBm
• Package / Case: SC-70-6, SC-88, SOT-363
• Rf Type: Cellular, GSM, PCS, UMTS
• Test Frequency: 1.95GHz
• Voltage - Supply: 2.3V ~ 2.9V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SGA3363Z
4 of 6
1, 2,
4, 5
Pin
3
6
RF OUT/BIAS
Function
RF IN
GND
Description
RF input pin. This pin requires the use of an external DC-blocking capacitor chosen for the frequency of operation.
Connection to ground. For optimum RF performance, use via holes as close to ground leads as possible to reduce lead
inductance.
RF output and bias pin. DC voltage is present on this pin, therefor a DC-blocking capacitor is necessary for proper opera-
tion.
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
Refer to drawing posted at www.rfmd.com for tolerances.
RF
I N
Suggested Pad Layout
Dimensions in inches (millimeters)
Package Drawing
Notes:
1. Provide a large ground pad area under device
2. Dimensions given for 50 Ohm RF I/O lines are for
3. We recommend 1 or 2 ounce copper. Measure-
OUT
RF
pins 1, 2, 4, & 5 with many plated via holes as
shown.
31 mil thick Getek. Scale accordingly for different
board thicknesses and dielectric contants.
ments for this data sheet were made on a 31 mil
thick Getek with 1 ounce copper on both sides.
Dimensions in inches [millimeters]
Preliminary
DS100831