BGA 416 E6327 Infineon Technologies, BGA 416 E6327 Datasheet - Page 2

• Manufacturer Part Number: BGA 416 E6327
• Description: AMP RF CASCODE 6V 20MA SOT-143
• Manufacturer: Infineon Technologies
• Type: General Purpose Amplifierr

Specifications of BGA 416 E6327

• Noise Figure: 1.6dB
• Current - Supply: 5.5mA
• Frequency: 100MHz ~ 3GHz
• Gain: 11dB
• P1db: -3dBm
• Package / Case: SOT-143, SOT-143B, TO-253AA
• Rf Type: Cellular, GSM, CDMA, TDMA, UMTS
• Test Frequency: 1.8GHz
• Voltage - Supply: 2.5V ~ 5V
• Supply Current: 5.5 mA
• Maximum Power Dissipation: 100 mW
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• Number Of Channels: 1 Channel
• Manufacturer's Type: MMIC Amplifier
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (typ): 3V
• Operating Supply Voltage (max): 5V
• Package Type: SOT-143
• Mounting: Surface Mount
• Pin Count: 3 +Tab
• Noise Figure (typ): 1.6@1800MHzdB
• Operating Temp Range: -65C to 150C
• Operating Temperature Classification: Military
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: BGA 416 E6327; BGA416E6327INTR; BGA416E6327XT; SP000013607

Edition 2008-04-21
Published by Infineon Technologies AG,
81726 München, Germany
Infineon Technologies AG 2008.
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.