AK5701VNP AKM Semiconductor Inc, AK5701VNP Datasheet - Page 26

• Manufacturer Part Number: AK5701VNP
• Description: IC ADC AUDIO STER 16BIT 24QFN
• Manufacturer: AKM Semiconductor Inc
• Type: ADCr

Specifications of AK5701VNP

• Resolution (bits): 16 b
• Sampling Rate (per Second): 7.35k ~ 48k
• Data Interface: I²S, Serial
• Voltage Supply Source: Analog and Digital
• Voltage - Supply: 3V
• Operating Temperature: -30°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-WFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 974-1039-2; AK5701VNP

■
When PMPLL bit is “0”, the AK5701 becomes EXT mode. Master clock is input from the MCKI pin, the internal PLL
circuit is not operated. This mode is compatible with I/F of the normal audio CODEC. The clocks required to operate are
MCKI (256fs, 512fs or 1024fs), EXLRCK (fs) and EXBCLK (≥32fs). The master clock (MCKI) should be synchronized
with EXLRCK. The phase between these clocks is not important. The input frequency of MCKI is selected by FS1-0 bits
(Table
The external clocks (MCKI, EXBCLK and EXLRCK) should always be present whenever the ADC is in operation
(PMADL bit = “1” or PMADR bit = “1”). If these clocks are not provided, the AK5701 may draw excess current and it is
not possible to operate properly because utilizes dynamic refreshed logic internally. If the external clocks are not present,
the ADC should be in the power-down mode (PMADL=PMADR bits = “0”).
MS0404-E-02
EXT Slave Mode (PMPLL bit = “0”, M/S bit = “0”)
Mode
11).
0
1
2
3
Table 11. MCKI Frequency at EXT Slave Mode (PMPLL bit = “0”, M/S bit = “0”) (x: Don’t care)
FS3-2 bits
x
x
x
x
AK5701
FS1 bit
MCKO
MCKI
EXBCLK
EXLRCK
SDTO
0
0
1
1
Figure 22. EXT Slave Mode
FS0 bit
256fs, 512fs or 1024fs
0
1
0
1
- 26 -
≥ 32fs
1fs
MCKI Input
Frequency
1024fs
256fs
512fs
256fs
MCLK
BCLK
LRCK
SDTI
DSP or μP
Sampling Frequency
7.35kHz ∼ 48kHz
7.35kHz ∼ 13kHz
7.35kHz ∼ 26kHz
7.35kHz ∼ 48kHz
Range
(default)
[AK5701]
2007/08