CM1214A-02MR ON Semiconductor, CM1214A-02MR Datasheet - Page 8

• Manufacturer Part Number: CM1214A-02MR
• Description: TVS AC SIGNAL ESD 2CH 8MSOP
• Manufacturer: ON Semiconductor
• Series: PicoGuard® CM1214Ar

Specifications of CM1214A-02MR

• Voltage - Reverse Standoff (typ): 7V
• Voltage - Breakdown: 11.3V
• Power (watts): 400mW
• Polarization: 2 Channel Array - Bidirectional
• Mounting Type: Surface Mount
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CM1214A
Application Information
CM1214A-01SO
The CM1214A-01SO protects a single bipolar signal line often found in RF circuits. One I/O pin (pin 1 for
example) is connected to the signal line for protection, and the other I/O pin is tied to GND. It is important to
have a solid ground connection to reduce the clamping voltage. Pin 3 of the 3-lead SOT23 must be left open
(and not connected on the PCB).
CM1214A-02MR
The CM1214A-02MR protects two bipolar lines, such as for Gbit Ethernet. The PCB traces underneath the
package connect across to the corresponding pins (Pins 1, 4, 6 and 7). Pins 2, 3, 5 and 8 of the MSOP-8
package must be left open (and not connected on the PCB).
Any disturbance on the line above or below the standoff voltage is clamped.
Figure 7. Typical Application - RF Switch and Amplifier Protection,
CM1214A-01SO in 3-lead SOT23
Figure 8. Typical Application - Ethernet Protection, CM1214A-02MR in 8-lead MSOP
Rev. 2 | Page 8 of 14 | www.onsemi.com