E3X-NA51 2M Omron, E3X-NA51 2M Datasheet - Page 3

• Manufacturer Part Number: E3X-NA51 2M
• Description: SENSOR PHOTOAMP FIBER 2M CBL
• Manufacturer: Omron
• Series: E3X-NAr
• Type: General Purposer

Specifications of E3X-NA51 2M

• Amplifier Type: Standard
• Voltage - Supply: 12 V ~ 24 V
• Output Type: PNP
• Current - Supply: 35mA
• Mounting Type: DIN Rail
• Fiber Optic Sensor Type: General Purpose
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E3X-NA51-2M; E3XNA512M; Z2941

Ratings and Specifications
Amplifier Units
*1. When there are 8 or more Units mounted side-by-side, the response time will be 350 s max.
*2. High-speed detection models do not have the mutual interference prevention function.
*3. The dielectric strength for water-resistant models with M8 connectors is 500 VAC.
*4. Add 10 g to the weight for water-resistant models.
Amplifier Unit Connectors
Item
Light source
(wavelength)
Power supply
voltage
Current
consumption
Control output
Self-diagnosis
output
Response time
Sensitivity
adjustment
Protection circuits
Timer function
Ambient illumination
(Receiver side)
Ambient
temperature range
Ambient humidity
range
Insulation resistance 20 M
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection IEC 60529 IP50 (with Protective Cover attached)
Connection method
Weight
(packed state)
Material
Accessories
Item
Rated current
Rated voltage
Contact resistance
Number of inser-
tions
Material
Weight
(packed state)
Model
Housing
Contact
NPN
output
PNP
output
Case
Cover
Model
Type
2.5 A
50 V
20 m max. (20 mVDC max., 100 mA max.)
(The above figure is for connection to the Amplifier Unit and the adjacent Connector. It does not include the conductor resistance of the cable.)
Destruction: 50 times (for connection to the Amplifier Unit and the adjacent Connector)
Polybutylene terephthalate (PBT)
Phosphor bronze/gold-plated nickel
Approx. 55 g
Red LED (680 nm)
12 to 24 VDC 10%, ripple (p-p): 10% max.
35 mA max.
Load current: 50 mA max.; residual voltage: 1 V max.; NPN/PNP (depends on model) open collector; Light-ON/Dark-ON mode selector
None
Operate or reset: 200 s max. *1
8-turn sensitivity adjuster (with indicator)
Reverse polarity, output short-circuit, mutual interference prevention (optically synchronized) *2
OFF-delay timer: 40 ms (fixed)
Incandescent lamp: 10,000 lux max.
Sunlight:
Operating:Groups of 1 to 3 Amplifiers: 25 C to 55 C
Storage:
Operating and storage: 35% to 85% (with no condensation)
1,000 VAC at 50/60 Hz for 1 minute *3
Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
Destruction: 500 m/s
Pre-wired (standard cable length: 2 m) or connector
Pre-wired models: approx. 100 g, Connector models: approx. 55 g (See note 4.) *4
Polybutylene terephthalate (PBT)
Polycarbonate
Instruction manual
min. (at 500 VDC)
Groups of 4 to11 Amplifiers: 25 C to 50 C
Groups of 12 to16 Amplifiers: 25 C to 45 C
30 C to 70 C (with no icing or condensation)
Standard models
E3X-NA@
20,000 lux max.
2
, for 3 times each in X, Y and Z directions
Yes
E3X-CN11
35 mA max.
(for 24-VDC power supply)
None
Operate: 20 s max.
Reset: 30 s max.
detection models
High-speed
E3X-NA@F
Approx. 25 g
Green LED (520 nm)
35 mA max.
Operate or reset: 200 s max. *1
Mark-detecting models
E3X-NAG@
E3X-CN12
Red LED (680 nm)
IEC 60529 IP66 (with Pro-
tective Cover attached)
Polyethersulfone (PES)
Water-resistant models
E3X-NA@V
E3X-NA
3