HM2J08PE5110N9LF FCI, HM2J08PE5110N9LF Datasheet - Page 19

• Manufacturer Part Number: HM2J08PE5110N9LF
• Description: CONN HEADER 125POS 2MM R/A PRSFT
• Manufacturer: FCI
• Series: Millipacs®r
• Type: Br

Specifications of HM2J08PE5110N9LF

• Connector Type: Header, Male Pins
• Connector Style: B 25
• Number Of Positions: 125
• Number Of Positions Loaded: All
• Pitch: 0.079" (2.00mm)
• Number Of Rows: 5
• Mounting Type: Through Hole, Right Angle
• Termination: Press-Fit
• Connector Usage: CompactPCI
• Contact Finish: Gold
• Contact Finish Thickness: 31.5µin (0.80µm)
• Current Rating: 1.5A
• Voltage Rating: 500V
• Operating Temperature: -55°C ~ 125°C
• Product Type: Male
• Number Of Positions / Contacts: 125
• Mounting Angle: Right
• Termination Style: Press Fit
• Housing Material: Thermoplastic, High Temperature
• Contact Material: Phosphor Bronze
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 609-2123

10.
TITLE
Copyright 2001 FCI USA, INC.
Form E-3334 02/12/01
POST-APPLICATION INSPECTION REQUIREMENTS
Post-application inspection should consist of several simple checks to assure that the receptacle (header)
is applied properly.
Millipacs
Visually assure that all press-fit tails are seated in the proper PCB holes and that none have been
crushed during application.
Visually assure that the plastic standoffs on the bottom of the assembly are seated within 0.13 mm of
flush to the PCB but not crushed (see Figure 16). A larger gap beneath the standoffs may indicate that
the receptacle (header) is not seated parallel to the board. This can cause receptacle (header)
misalignment with adjacent Millipacs
®
HM 5 and 8 Row Right Angle Signal Receptacles
Millipacs
®
Application Guide
HM Right Angle Headers
Figure 16 -- Proper Receptacle (header) assembly
TYPE
APPLICATION SPECIFICATION
®
HM components.
PDM: Rev:B
STATUS:
NUMBER
PAGE
AUTHORIZED BY
T. De Rooster
19 of 22
Released
UNRESTRICTED
GS-20-022
REVISION
DATE
Printed: Feb 25, 2010
16-May-02
B
GS-01-001
.