98-0440-0360-0 3M, 98-0440-0360-0 Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/0/1/3m_sml.jpg)
98-0440-0360-0
Manufacturer Part Number
98-0440-0360-0
Description
DBEF-E FILM 45 DEG 17"X17"10 PCS
Manufacturer
3M
Series
Vikuiti™r
Type
Film, Dual Brightness Enhancement-Embossed (DBEF-E)r
Specifications of 98-0440-0360-0
Size
17.00" L x 17.00" W(431.80mm x 431.80mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
3M5671-KIT
51138749910
51138749910
General Converting, Assembly, and Handling Recommendations
D
Die cutting is the recommended form of converting and will result in the cleanest edges, although shear cutting
and laser cutting may also be acceptable. Whatever method used, you should ensure that the part has clean, crisp
edges without any raggedness or other damage.
The part should be precisely cut to provide a close fit in the cavity, yet not so close to experience binding or
warping problems from thermal expansion.
The part should be left free-floating in the cavity to avoid warping or buckling. If necessary, the part may be tacked
down along one edge or two adjacent corners with a double coated tape, such as Scotch
incorporating mounting tabs, or holes mated to mounting pins are also popular.
Remove both protective liners, if the film has them, by tacking near an edge or corner with a piece of aggressive
tape and pull gently.
Be aware that handling any polymer film can generate electrostatic charges which can attract dust and debris.
Remove any loose debris from the film by using compressed air.
Avoid fingerprints and debris by wearing clean latex gloves and holding the product at the edges.
Keep the area very clean to lessen the likelihood of debris contamination. Maintaining class 1000 clean room
conditions is recommended.
Using anti-static measures, such as ionized air blowers whenever possible, is recommended.
As always, protect the film, especially the edges, from any undue shock or stress.
S t o r a g e
Material should be stored in its original packaging, laying in a horizontal orientation, away from direct sunlight.
Heavy objects should not be piled on top of it to avoid damaging the product. Ambient temperature and humidity
should be controlled to 10 – 30 degrees C at 50 +/- 20% R.H.
Important Notice to Purchaser
3M warrants that, at the time of shipment, product will meet 3M’s published specification or that specification
agreed in writing between 3M and purchaser, for twelve months after the date of receipt at purchaser’s location
provided that the product is stored flat in accordance with the requirements in the section titled Storage above and
in the original package. Should product not meet specifications at time of shipment and for twelve months
thereafter, 3M will replace or refund the purchase price of such quantity of the product found not to meet
specifications. Given the variety of factors that can affect the use and performance of a 3M Mobile Interactive
Solutions Product (the “Product”), some of which are uniquely within the user’s knowledge and control, it is
essential that the user evaluate the 3M Mobile Interactive Solutions Product to determine whether it is suitable for
user’s particular purpose and suitable for user’s method of application. 3M Mobile Interactive Solutions’ statements,
engineering/technical information, and recommendations are provided for user’s convenience, but their accuracy or
completeness is not warranted.
3
Mobile Interactive Solutions Division
3M Center, 235-1E-54
St. Paul, MN 55144-1000
uring converting operations, both the front and rear protective liners should remain on the film.
Minimum 10% Post-Consumer Fiber
Vikuiti and the Vikuiti “Eye” symbol are trademarks of 3M.
Scotch is a registered trademark of 3M.
Printed in U.S.A.
© 3M 2010
75-0500-5203-6
11988SA012210NM
®
Tape #415. Designs