B72735D50H62 EPCOS Inc, B72735D50H62 Datasheet - Page 20

• Manufacturer Part Number: B72735D50H62
• Description: CERADIODE ARRAY 5.6VDC 1012
• Manufacturer: EPCOS Inc
• Series: CeraDioder

Specifications of B72735D50H62

• Package / Case: 1012 (2532 Metric)
• Varistor Voltage: 52V
• Number Of Circuits: 4
• Maximum Dc Volts: 5.6VDC
• Polarity: Bidirectional
• Channels: 3 Channels
• Clamping Voltage: 195 V
• Operating Voltage: 5.6 V
• Breakdown Voltage: 52 V
• Termination Style: SMD/SMT
• Capacitance: 7 pF
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Energy: -
• Current-surge: -
• Maximum Ac Volts: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 495-3423-2; CDA6C05GTH

Storage
Handling
Mounting
Soldering
Please read Cautions and warnings and
Important notes at the end of this document.
CeraDiodes
High-speed series
Only store CeraDiodes in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature -25 to +45 C, relative humidity 75% an-
nual average, maximum 95%, dew precipitation is inadmissible.
Do not store CeraDiodes where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CeraDiodes may stick together, causing problems dur-
ing mounting.
Avoid contamination of the CeraDiode surface during storage, handling and processing.
Avoid storing CeraDiodes in harmful environments where they are exposed to corrosive gases
for example (SO
Use CeraDiodes as soon as possible after opening factory seals such as polyvinyl-sealed pack-
ages.
Solder CeraDiodes after shipment from EPCOS within the time specified: 12 months.
Do not drop CeraDiodes and allow them to be chipped.
Do not touch CeraDiodes with your bare hands - gloves are recommended.
Avoid contamination of the CeraDiode surface during handling.
When CeraDiodes are encapsulated with sealing material or overmolded with plastic material,
be aware that potting, sealing or adhesive compounds can produce chemical reactions in the
CeraDiode ceramic that will degrade its electrical characteristics and reduce its lifetime.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CeraDiodes are clean before mount-
ing.
The surface temperature of an operating CeraDiode can be higher. Ensure that adjacent com-
ponents are placed at a sufficient distance from a CeraDiode to allow proper cooling.
Avoid contamination of the CeraDiode surface during processing.
Only CeraDiodes with an Ni barrier termination are approved for lead-free soldering.
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
x
, Cl).
Page 20 of 22