B72500D90A60 EPCOS Inc, B72500D90A60 Datasheet - Page 17

• Manufacturer Part Number: B72500D90A60
• Description: CERADIODE 9VDC 30A 0603
• Manufacturer: EPCOS Inc
• Series: CeraDioder

Specifications of B72500D90A60

• Package / Case: 0603 (1608 Metric)
• Varistor Voltage: 10V
• Current-surge: 30A
• Number Of Circuits: 1
• Maximum Dc Volts: 9VDC
• Polarity: Bidirectional
• Clamping Voltage: 30 V
• Operating Voltage: 9 V
• Breakdown Voltage: 10 V
• Termination Style: SMD/SMT
• Peak Surge Current: 30 A
• Peak Pulse Power Dissipation: 1600 W
• Capacitance: 220 pF
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Diode Type: ESD Protection
• Clamping Voltage Vc Max: 30V
• Diode Case Style: 0603
• Operating Temperature Range: -40°C To +85°C
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 85C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Energy: -
• Maximum Ac Volts: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 495-3415-2; B72500D 90A 60; B72500D0090A060; CDS3C09GTA

5.7
It is of advantage to place the components on the board before soldering so that their two termi-
nals do not enter the solder oven at different times. Ideally, both terminals should be wetted si-
multaneously.
5.8
5.9
CECC 00802
IEC 60068-2-58
IEC 60068-2-20
JEDEC J-STD-020D
Please read Cautions and warnings and
Important notes at the end of this document.
CeraDiodes
Standard series
Sudden heating or cooling of the component results in thermal destruction by cracks.
An excessively long soldering time or high soldering temperature results in leaching of the out-
er electrodes, causing poor adhesion due to loss of contact between electrodes and termina-
tion.
Avoid manual soldering with a soldering iron.
Wave soldering must not be applied for CeraDiodes designated for reflow soldering only.
Keep to the recommended down-cooling rate.
Placement of components on circuit board
Soldering caution
Standards
Page 17 of 22