67F100 Sensata Technologies/Airpax, 67F100 Datasheet - Page 2
![THERMOSTAT 100 DEG NO TO-220](/photos/1/36/13680/723-to-220_sml.jpg)
67F100
Manufacturer Part Number
67F100
Description
THERMOSTAT 100 DEG NO TO-220
Manufacturer
Sensata Technologies/Airpax
Series
6700r
Datasheet
1.67L110.pdf
(5 pages)
Specifications of 67F100
Circuit
Normally Open
Switching Temperature
212°F (100°C)
Package / Case
TO-220
Mounting Type
Through Hole
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
723-1181
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
67F100
Manufacturer:
AIRPAX
Quantity:
4 460
http://airpax.sensata.com/
Mounting Bracket Material
SPECIFICATIONS
Soldering Heat Resistance
Temperature Tolerance
Operating Temperature
Short Term / Long Term
Insulation Resistance
Chemical Resistance
Contact Resistance
Contact Operations
Dielectric Strength
Agency Approvals
Terminal Material
Contact Material
Contact Bounce
Contact Ratings
Exposure Limit
Base Material
Solderability
Vibration
Weight
Shock
Seal
50 milliohms max (before and after rated life)
Cycles
30,000
30,000
100,000
100,000
Either close on rise (make) or open on rise (break)
40°C to 130°C (104°F to 266°F)
Standard of ±5°C (±9°F) with nominal operating temperature settings in 5°C increments
Short = 260°C (500°F), 10 second duration
Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket
has 2000 VAC 60Hz, 1 second duration terminals to case.
100 Mohms at 500 VDC
3 milliseconds max (make)
Per Mil-Std-202, method 204D, test condition D, 10 to 2,000 Hz
Per Mil-Std-202, method 213, test condition C, 100 G’s for 6 millisecond duration, ½ sine wave
High temperature epoxy sealed for wave soldering and cleaning, moisture proof per Sensata
specification S-722 (unit will not leak while submerged in 9” of water for a minimum of two minutes)
PPS (Polyphenylene Sulfide), 94 VO rated
65% Copper, 18% Nickel
Gold-plated or overlay, silver crossbar
Nickel-plated copper (standard) or high pressure laminated plastic (“P” mounting bracket option)
Unit is resistance to water, salt, alcohol, ammonia, trichlorethane and most other organic solvents
Terminal material is selectively striped with lead-free solder for improved solderability.
Per Mil-Std-202G, method 210F, test condition C & K, test condition K validated at 260°C for 25 seconds
Approximately 0.5 grams
cЯUus recognized E36687
VDE approval 0631/12.83
RoHS Compliant per EU Directive 2002/95/EC
Voltage
48 VDC
120 VAC
5 VDC
5 VDC
Amps (resistive)
1.0
1.0
0.020 (gold)
0.001 (gold)
Long = -55°C to 160°C (-67°F to 320°F)
6700 Series
44