MAX603CSA Maxim Integrated Products, MAX603CSA Datasheet - Page 10

• Manufacturer Part Number: MAX603CSA
• Description: IC LDO REG LOW-IQ 5V/ADJ 8-SOIC
• Manufacturer: Maxim Integrated Products

Specifications of MAX603CSA

• Regulator Topology: Positive Fixed or Adjustable
• Voltage - Output: 5V, 1.25 ~ 11 V
• Voltage - Input: 2.7 ~ 11.5 V
• Voltage - Dropout (typical): 0.32V @ 500mA
• Number Of Regulators: 1
• Current - Output: 500mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 11.5 V
• Output Voltage: 1.25 V to 11 V, 5 V
• Output Type: Adjustable, Fixed
• Dropout Voltage (max): 0.22 V at 200 mA
• Output Current: 500 mA
• Line Regulation: 7 mV
• Load Regulation: 60 mV
• Voltage Regulation Accuracy: 3 %
• Maximum Power Dissipation: 1.8 W
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Reference Voltage: 1.2 V
• Case: SOP8
• Dc: 00+
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Limit (min): -

A regulator’s minimum input-output voltage differential,
or dropout voltage, determines the lowest usable supply
voltage. In battery-powered systems, this will determine
the useful end-of-life battery voltage. Because the
MAX603/MAX604 use a P-channel MOSFET pass tran-
sistor, their dropout voltage is a function of r
plied by the load current (see Electrical Characteristics ).
Quickly stepping up the input voltage from the dropout
voltage can result in overshoot. This occurs when the
pass transistor is fully on at dropout and the IC is not
given time to respond to the supply voltage change.
Prevent this by slowing the input voltage rise time.
5V/3.3V or Adjustable, Low-Dropout,
Low I
10
______________________________________________________________________________________
Q
Input-Output (Dropout) Voltage
, 500mA Linear Regulators
DS(ON)
multi-
TRANSISTOR COUNT: 111
NO DIRECT SUBSTRATE CONNECTION. THE N-SUBSTRATE
IS INTERNALLY SWITCHED BETWEEN THE MORE POSITIVE
OF IN OR OUT.
___________________Chip Topography
OFF GND
IN
(2.64mm)
0.104"
OUT
SET
(2.54mm)
0.100"