TA78L05S(TPE2,F) Toshiba, TA78L05S(TPE2,F) Datasheet - Page 13

• Manufacturer Part Number: TA78L05S(TPE2,F)
• Description: IC VREG 5V 0.1A SSIP3
• Manufacturer: Toshiba

Specifications of TA78L05S(TPE2,F)

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 35V
• Voltage - Dropout (typical): 1.7V @ 40mA
• Number Of Regulators: 1
• Current - Output: 100mA (Max)
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: *
• Polarity: Positive
• Number Of Outputs: 1
• Output Type: Fixed
• Output Voltage: 5 V
• Output Current: 0.1 A
• Line Regulation: 150 mV
• Load Regulation: 60 mV
• Input Voltage Max: 35 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 30 C
• Maximum Power Dissipation: 600 mW
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Usage Precautions
Destruction of the IC may occur if high voltage in excess of the IC output voltage (typ. value) is applied to the IC
output terminal. Where this possibility exists, connect a Zener diode between the output terminal and GND to
prevent any application of excessive voltage.
• Low voltage
• Overcurrent Protection
• Overheating Protection
Do not apply voltage to the Product that is lower than the minimum operating voltage, or the Product’s
protective functions will not operate properly and the Product may be permanently damaged.
The overcurrent protection circuits in the Product are designed to temporarily protect Product from minor
overcurrent of brief duration. When the overcurrent protective function in the Product activates,
immediately cease application of overcurrent to Product. Improper usage of Product, such as application of
current to Product exceeding the absolute maximum ratings, could cause the overcurrent protection circuit
not to operate properly and/or damage Product permanently even before the protection circuit starts to
operate.
The thermal shutdown circuits in the Product are designed to temporarily protect Product from minor
overheating of brief duration. When the overheating protective function in the Product activates,
immediately correct the overheating situation. Improper usage of Product, such as the application of heat
to Product exceeding the absolute maximum ratings, could cause the overheating protection circuit not to
operate properly and/or damage Product permanently even before the protection circuit starts to operate.
13
TA78L05,07,08,09,10,12,15S
2008-04-22