ADP3338AKCZ-3.3RL7 Analog Devices Inc, ADP3338AKCZ-3.3RL7 Datasheet - Page 4

• Manufacturer Part Number: ADP3338AKCZ-3.3RL7
• Description: IC REG LDO 1A PREC 3.3V SOT-223
• Manufacturer: Analog Devices Inc
• Series: anyCAP®r

Specifications of ADP3338AKCZ-3.3RL7

• Regulator Topology: Positive Fixed
• Voltage - Output: 3.3V
• Voltage - Input: Up to 8V
• Voltage - Dropout (typical): 0.19V @ 1A
• Number Of Regulators: 1
• Current - Output: 1A
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-223 (3 leads + Tab), SC-73, TO-261
• Primary Input Voltage: 8V
• Output Voltage Fixed: 3.3V
• Dropout Voltage Vdo: 190mV
• No. Of Pins: 3
• Output Current: 1A
• Operating Temperature Range: -40°C To +85°C
• Msl: MSL 3 - 168 Hours
• Voltage Regulator Case Style: SOT-223
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADP3338AKCZ-3.3RL7TR

ADP3338
ABSOLUTE MAXIMUM RATINGS
Unless otherwise specified, all voltages are referenced to GND.
Table 2.
Parameter
Input Supply Voltage
Power Dissipation
Operating Ambient Temperature Range
Operating Junction Temperature Range
θ
θ
Storage Temperature Range
Lead Temperature (Soldering 10 sec)
Vapor Phase (60 sec)
Infrared (15 sec)
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
JA
JC
Rating
−0.3 V to +8.5 V
Internally limited
−40°C to +85°C
−40°C to +150°C
62.3°C/W
26.8°C/W
−65°C to +150°C
300°C
215°C
220°C
Rev. B | Page 4 of 16
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any one
time.