NJM2930F05# NJR, NJM2930F05# Datasheet - Page 3

• Manufacturer Part Number: NJM2930F05#
• Description: IC VOLT REG LOW-DROP OUT TO-220
• Manufacturer: NJR

Specifications of NJM2930F05#

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 26V
• Voltage - Dropout (typical): 0.3V @ 150mA
• Number Of Regulators: 1
• Current - Output: 150mA
• Operating Temperature: -30°C ~ 75°C
• Mounting Type: Through Hole
• Package / Case: TO-220
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Other names: NJM#2930F05; NJM#2930F05

■ STANDARD APPLICATION EXAMPLES
* This NJM2930 is required when the mounting position is separated from the power filter.
** Use an aluminum electrolytic capacitor or a tantalum capacitor as C
*** When application on automobile car operation, the minus pulse might
■ POWER DISSIPATION VS. AMBIENT TEMPERATURE
Ver.2007-02-14
be input on IC. In this case, however, the pulse might trigger to latch up.
If it were that, this kind of latching up might be continued, the IC would
burn up into defective in many cases. It is advisable to apply D1, D2
as described in the drawing, in order to prevent from making any
troubles. It is important to make devices D1, D2 against V
to stand for brake down voltage, current volume, and then less volume
for Vf.
capacitors should be down to -30°C. A capacity value of 10μF is a minimum requirement for improving the stability
and transient response. Mount it at a position as close to the leads as possible.
NJM2930 (TO-220F)
IN
to be able
2
. The temperature guarantee range of
- 3 -