S-816A27AMC-BACT2G Seiko Instruments, S-816A27AMC-BACT2G Datasheet - Page 12

• Manufacturer Part Number: S-816A27AMC-BACT2G
• Description: IC REG LDO 1A 2.7V SOT23-5
• Manufacturer: Seiko Instruments

Specifications of S-816A27AMC-BACT2G

• Regulator Topology: Positive Fixed
• Voltage - Output: 2.7V
• Voltage - Input: Up to 16V
• Voltage - Dropout (typical): 0.1V @ 100mA
• Number Of Regulators: 1
• Current - Output: 1A
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 16 V
• Output Voltage: 2.7 V
• Output Type: Fixed
• Dropout Voltage (max): 100 mV
• Output Current: 1 A
• Line Regulation: 0.15 % / V
• Load Regulation: 60 mV
• Voltage Regulation Accuracy: 2 %
• Maximum Power Dissipation: 600 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

12
EXTERNAL TRANSISTOR TYPE CMOS VOLTAGE REGULATOR
S-816 Series
• The overcurrent protection function of this IC detects and limits the sink current at the EXT pin inside the
• This IC performs phase compensation by using an internal phase compensator circuit and the ESR of an
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
• Make sure that the power dissipation inside the IC due to the EXT output sink current (especially at a high
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by
Precautions
IC. Therefore, it does not work on collector overcurrents which are caused by an EXT-GND short-
circuiting or other phenomenon outside the IC. To protect the external PNP transistor from collector
overcurrents perfectly, it is necessary to provide another external overcurrent protection circuit.
output capacitor. Therefore, always place a capacitor of 4.7 μF or more between VOUT and VSS.
A tantalum type capacitor is recommended for this purpose. Moreover, to secure stable operation of the
S-816 Series, it will be necessary to employ a capacitor having an ESR (Equivalent Series Resistance)
covered in a certain optimum range (0.1 Ω to 5 Ω). Whether an ESR is larger or smaller than that
optimum range, this could result in an unstable output, and cause a possibility of oscillations. Select a
capacitor through careful evaluation made according to the actual service conditions.
electrostatic protection circuit.
temperature) will not surpass the power dissipation of the package.
products including this IC of patents owned by a third party.
Seiko Instruments Inc.
Rev.6.0
_00