MCP1702T-5002E/MB Microchip Technology, MCP1702T-5002E/MB Datasheet - Page 12
![IC REG LDO 5V 250MA SOT-89-3](/photos/12/58/125851/c04-029_mb_sml.jpg)
MCP1702T-5002E/MB
Manufacturer Part Number
MCP1702T-5002E/MB
Description
IC REG LDO 5V 250MA SOT-89-3
Manufacturer
Microchip Technology
Specifications of MCP1702T-5002E/MB
Package / Case
SC-62, SOT-89, TO-243 (3 Leads + Tab)
Regulator Topology
Positive Fixed
Voltage - Output
5V
Voltage - Input
Up to 13.2V
Voltage - Dropout (typical)
0.33V @ 250mA
Number Of Regulators
1
Current - Output
250mA (Min)
Operating Temperature
-40°C ~ 125°C
Mounting Type
Surface Mount
Number Of Outputs
1
Polarity
Positive
Input Voltage Max
13.2 V
Output Voltage
5 V
Output Type
Fixed
Dropout Voltage (max)
0.65 V at 250 mA
Output Current
250 mA
Line Regulation
0.1 % / V
Load Regulation
1 %
Voltage Regulation Accuracy
0.4 %
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
Primary Input Voltage
5.65V
Output Voltage Fixed
5V
Dropout Voltage Vdo
625mV
No. Of Pins
3
Voltage Regulator Case Style
SOT-89
Operating Temperature Range
-40°C To +125°C
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
GPIODM-KPLCD - BOARD DEMO LCD GPIO EXP KEYPAD
Current - Limit (min)
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
MCP1702T-5002E/MB
MCP1702T-5002E/MBTR
MCP1702T-5002E/MBTR
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MCP1702T-5002E/MB
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
MCP1702
5.0
The MCP1702 CMOS LDO linear regulator is intended
for applications that need the lowest current consump-
tion while maintaining output voltage regulation. The
operating continuous load range of the MCP1702 is
from 0 mA to 250 mA (V
voltage range is from 2.7V to 13.2V, making it capable
of operating from two or more alkaline cells or single
and multiple Li-Ion cell batteries.
5.1
The input of the MCP1702 is connected to the source
of the P-Channel PMOS pass transistor. As with all
LDO circuits, a relatively low source impedance (10Ω)
is needed to prevent the input impedance from causing
the LDO to become unstable. The size and type of the
capacitor needed depends heavily on the input source
type (battery, power supply) and the output current
range of the application. For most applications (up to
100 mA), a 1 µF ceramic capacitor will be sufficient to
ensure circuit stability. Larger values can be used to
improve circuit AC performance.
DS22008A-page 12
FUNCTIONAL DESCRIPTION
Input
R
≥ 2.5V). The input operating
5.2
The maximum rated continuous output current for the
MCP1702 is 250 mA (V
where V
200 mA.
A minimum output capacitance of 1.0 µF is required for
small signal stability in applications that have up to
250 mA output current capability. The capacitor type
can be ceramic, tantalum or aluminum electrolytic. The
esr range on the output capacitor can range from 0Ω to
2.0Ω.
5.3
When powering up the internal reference output, the
typical output rise time of 500 µs is controlled to
prevent overshoot of the output voltage. There is also a
startup delay time that ranges from 300 µs to 800 µs
based on loading. The startup time is separate from
and precedes the Output Rise Time. The total output
delay is the Startup Delay plus the Output Rise time.
Output
R
Output Rise time
< 2.5V, the maximum output current is
© 2006 Microchip Technology Inc.
R
≥ 2.5V). For applications