MIC5205-3.3YM5 TR Micrel Inc, MIC5205-3.3YM5 TR Datasheet - Page 4

• Manufacturer Part Number: MIC5205-3.3YM5 TR
• Description: IC REG LDO 150MA 3.3V 1% SOT23-5
• Manufacturer: Micrel Inc

Specifications of MIC5205-3.3YM5 TR

• Regulator Topology: Positive Fixed
• Voltage - Output: 3.3V
• Voltage - Input: Up to 16V
• Voltage - Dropout (typical): 0.165V @ 150mA
• Number Of Regulators: 1
• Current - Output: 150mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Primary Input Voltage: 4.3V
• Output Voltage: 3.3V
• Dropout Voltage Vdo: 165mV
• No. Of Pins: 5
• Output Current: 150mA
• Voltage Regulator Case Style: SOT-23
• Operating Temperature Range: -40°C To +125°C
• Voltage Regulator Type: Linear
• Topology: LDO
• Regulator Output Type: Fixed
• Polarity Type: Positive
• Number Of Outputs: Single
• Input Voltage (min): 2.5V
• Input Voltage (max): 16V
• Package Type: SOT-23
• Load Regulation: 0.2%
• Line Regulation: 0.012%/V
• Output Voltage Accuracy: ±1%
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Dropout Voltage@current (max): 0.275@150mA
• Dropout Voltage@current (typ): 0.165@150mA
• Pin Count: 5
• Mounting: Surface Mount
• Output Voltage Fixed: 3.3V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Compliant
• Other names: 576-1259-2

Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation at any T
4. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range.
5. Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range
6. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V
7. Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn from the supply is the sum of the load
8, Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is applied, excluding load or line
Micrel
February 2006
power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. The ⎝
versions) is 220°C/W mounted on a PC board (see “Thermal Considerations” section for further details).
from 0.1mA to 150mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification.
differential.
current plus the ground pin current.
regulation effects. Specifications are for a 150mA load pulse at V
A
(ambient temperature) is P
IN
= 16V for t = 10ms.
4
D(max)
= (T
J(max)
– T
A
) ⎟ ⎝
JA
. Exceeding the maximum allowable
JA
of the MIC5205-xxBM5 (all
[phone]
M9999-020806
MIC5205