MCP1802T-2502I/OT Microchip Technology, MCP1802T-2502I/OT Datasheet - Page 15

• Manufacturer Part Number: MCP1802T-2502I/OT
• Description: IC REG LDO 300MA 2.5V SOT23-5
• Manufacturer: Microchip Technology

Specifications of MCP1802T-2502I/OT

• Regulator Topology: Positive Fixed
• Voltage - Output: 2.5V
• Voltage - Input: Up to 10V
• Voltage - Dropout (typical): 0.24V @ 100mA
• Number Of Regulators: 1
• Current - Output: 300mA (Min)
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Primary Input Voltage: 10V
• Output Voltage Fixed: 2.5V
• Dropout Voltage Vdo: 800mV
• No. Of Pins: 5
• Output Current: 300mA
• Operating Temperature Range: -40°C To +85°C
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: MCP1802T-2502I/OT; MCP1802T-2502I/OTTR

5.0
The MCP1802 CMOS low dropout linear regulator is
intended for applications that need the low current
consumption
regulation. The operating continuous load range of the
MCP1802 is from 0 mA to 300 mA. The input operating
voltage range is from 2.0V to 10.0V, making it capable
of operating from three or more alkaline cells or single
and multiple Li-Ion cell batteries.
5.1
The input of the MCP1802 is connected to the source
of the P-Channel PMOS pass transistor. As with all
LDO circuits, a relatively low source impedance (10)
is needed to prevent the input impedance from causing
the LDO to become unstable. The size and type of the
capacitor needed depends heavily on the input source
type (battery, power supply) and the output current
range of the application. For most applications a 0.1 µF
ceramic capacitor will be sufficient to ensure circuit
stability. Larger values can be used to improve circuit
AC performance.
 2010 Microchip Technology Inc.
FUNCTIONAL DESCRIPTION
Input
while
maintaining
output
voltage
5.2
The maximum rated continuous output current for the
MCP1802 is 300 mA.
A minimum output capacitance of 1.0 µF is required for
small signal stability in applications that have up to
300 mA output current capability. The capacitor type
can be ceramic, tantalum or aluminum electrolytic.
Output
MCP1802
DS22053C-page 15