LM675T/NOPB National Semiconductor, LM675T/NOPB Datasheet - Page 9

• Manufacturer Part Number: LM675T/NOPB
• Description: IC OP AMP POWER TO-220-5
• Manufacturer: National Semiconductor

Specifications of LM675T/NOPB

• Amplifier Type: Power
• Number Of Circuits: 1
• Slew Rate: 8 V/µs
• Gain Bandwidth Product: 5.5MHz
• Current - Input Bias: 200nA
• Voltage - Input Offset: 1000µV
• Current - Supply: 18mA
• Current - Output / Channel: 4A
• Voltage - Supply, Single/dual (±): 10 V ~ 60 V, ±5 V ~ 30 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Bent and Staggered Leads)
• Bandwidth: 5.5 MHz
• Common Mode Rejection Ratio: 90
• Current, Input Bias: 0.2 μA
• Current, Input Offset: 50 nA
• Current, Output: 4000 mA
• Current, Supply: 18 mA
• Number Of Amplifiers: Single
• Package Type: TO220-5
• Power Dissipation: 30 W
• Temperature, Operating, Range: 0 to +70 °C
• Voltage, Gain: 90 dB
• Voltage, Input: 10 to 60 V
• Voltage, Noise: 16 nV/sqrt Hz
• Voltage, Offset: 1 mV
• Voltage, Output, High: 21 V
• Voltage, Output, Low: -21 V
• Voltage, Supply: ±25 V
• Number Of Channels: 1
• Voltage Gain Db: 90 dB
• Common Mode Rejection Ratio (min): 70 dB
• Input Offset Voltage: 10 mV at +/- 25 V
• Operating Supply Voltage: 18 V, 24 V, 28 V
• Supply Current: 50 mA at +/- 25 V
• Maximum Power Dissipation: 30000 mW
• Maximum Operating Temperature: + 70 C
• Maximum Dual Supply Voltage: +/- 30 V
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM675T; *LM675T/NOPB; LM675; LM675T

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
BANNED SUBSTANCE COMPLIANCE
National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship
Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned
Substances’’ as defined in CSP-9-111S2.
Physical Dimensions
www.national.com
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted
Email: [e-mail]
Fax: [phone]
Tel: [phone]
TO-220 Power Package (T)
Order Number LM675T
NS Package T05D
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]