PA240CC Cirrus Logic Inc, PA240CC Datasheet - Page 2

• Manufacturer Part Number: PA240CC
• Description: IC PWR AMP 350V 120MA 7DDPAK
• Manufacturer: Cirrus Logic Inc
• Series: Apex Precision Power™r

Specifications of PA240CC

• Amplifier Type: Power
• Number Of Circuits: 1
• Slew Rate: 30 V/µs
• Gain Bandwidth Product: 3MHz
• Current - Input Bias: 50pA
• Voltage - Input Offset: 25000µV
• Current - Supply: 2.2mA
• Current - Output / Channel: 120mA
• Voltage - Supply, Single/dual (±): 100 V ~ 350 V, ±50 V ~ 175 V
• Operating Temperature: -25°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: TO-263-7, D²Pak (7 leads + Tab), TO-263CA
• Number Of Channels: 1
• Voltage Gain Db: 96 dB
• Common Mode Rejection Ratio (min): 84 dB
• Input Offset Voltage: 40 mV
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Dual Supply Voltage: +/- 175 V
• Minimum Operating Temperature: - 25 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1354

CAGE JACKS
MS11
jacks. The strip can easily be cut to any desired number of
cage jacks. These are mounted directly in a print circuit board.
After soldering, the carrier is pulled off the cage jacks. Use
a spacer between the PCB and the heatsink to avoid short
circuits.
APEX MICROTECHNOLOGY CORPORATION • 5980 NORTH SHANNON ROAD • TUCSON, ARIZONA 85741 • USA • APPLICATIONS HOTLINE: [phone]
2
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
Part number MS11 consists of a carrier strip of 30 cage
AN SA60 REV B JUNE 2005 © 2005 Apex Microtechnology Corp.
THERMAL WASHER
TW14
NOTES:
1. Base material is Kapton MT, 0.002” thick.
2. For optimum thermal transfer, avoid abrasive handling of
3. The dry thermal compound will flow filling header to heatsink
4. Do not store unused thermal washers above 40°C.
5. A new washer must be used for each mounting.
6. Part number TW14 consists of a package of 10 washers.
7. Thermal resistance is 0.17°C/W.
washers which can damage their 0.5mil thick layer of thermal
compound with which each side is coated.
voids as soon as the material reached 60°C.