MCHC908JK3CPE Freescale Semiconductor, MCHC908JK3CPE Datasheet - Page 83

• Manufacturer Part Number: MCHC908JK3CPE
• Description: IC MCU 4K FLASH 20-PDIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908JK3CPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 15
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.3 V
• Data Converters: A/D 12x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

7.5.3 SIM Counter and Reset States
7.6 Exception Control
7.6.1 Interrupts
MC68H(R)C908JL3
Freescale Semiconductor
—
Rev. 1.1
External reset has no effect on the SIM counter. (See
for details.) The SIM counter is free-running after all reset states. (See
7.4.2 Active Resets from Internal Sources
internal reset recovery sequences.)
Normal, sequential program execution can be changed in three different
ways:
An interrupt temporarily changes the sequence of program execution to
respond to a particular event.
system interrupts.
Interrupts are latched, and arbitration is performed in the SIM at the start
of interrupt processing. The arbitration result is a constant that the CPU
uses to determine which vector to fetch. Once an interrupt is latched by
the SIM, no other interrupt can take precedence, regardless of priority,
until the latched interrupt is serviced (or the I bit is cleared).
•
•
•
Interrupts
– Maskable hardware CPU interrupts
– Non-maskable software interrupt instruction (SWI)
Reset
Break interrupts
System Integration Module (SIM)
Figure 7-8
flow charts the handling of
System Integration Module (SIM)
for counter control and
7.7.2 Stop Mode
Technical Data
81