DSPIC30F5015T-20I/PT Microchip Technology, DSPIC30F5015T-20I/PT Datasheet - Page 8

• Manufacturer Part Number: DSPIC30F5015T-20I/PT
• Description: IC DSPIC MCU/DSP 66K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5015T-20I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• For Use With: AC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC30F Family Reference Manual
12. Page 5-8, Register 5-2: NVMADR:
DS80169E-page 8
Upper Byte:
bit 15
R/W-x
On page 5-8, Register 5-2: NVMADR: Non-Volatile
Memory Address Register, bit 15-0 should be
replaced with the following: :
Non-Volatile Memory Address Register,
bit 15-0
bit 15-0
Legend:
R = Readable bit
-n = Value at POR
NVMADR<15:0>: NV Memory Write Address bits
Selects the location to program or erase in program or data Flash memory.
This register may be read or written by user. This register will contain the address of EA<15:0> of the
last table write instruction executed, until written by the user.
R/W-x
Note:
Lower Byte:
bit 7
R/W-x
The NVMADRU register function is similar to the NVMADR register and holds the upper 8
bits of the location to be programmed or erased. The value of the TBLPAG register is
automatically loaded into the NVMADRU register during a table write instruction.
R/W-x
R/W-x
NVMADR<15:8>
R/W-x
W = Writable bit
‘1’ = Bit is set
R/W-x
R/W-x
NVMADR<7:0>
R/W-x
R/W-x
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-x
R/W-x
R/W-x
 2004 Microchip Technology Inc.
R/W-x
x = Bit is unknown
bit 8
R/W-x
R/W-x
bit 0