AT89C51RB2-3CSIM Atmel, AT89C51RB2-3CSIM Datasheet - Page 36

• Manufacturer Part Number: AT89C51RB2-3CSIM
• Description: IC 8051 MCU FLASH 16K 40DIP
• Manufacturer: Atmel
• Series: 89Cr

Specifications of AT89C51RB2-3CSIM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 60MHz
• Connectivity: SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Data Bus Width: 8 bit
• Data Ram Size: 1.25 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• For Use With: AT89STK-11 - KIT STARTER FOR AT89C51RX2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No

36
AT89C51RB2/RC2
Table 24. CCAPMn Registers (n = 0-4)
CCAPM0 – PCA Module 0 Compare/Capture Control Register (0DAh)
CCAPM1 – PCA Module 1 Compare/Capture Control Register (0DBh)
CCAPM2 – PCA Module 2 Compare/Capture Control Register (0DCh)
CCAPM3 – PCA Module 3 Compare/Capture Control Register (0DDh)
CCAPM4 – PCA Module 4 Compare/Capture Control Register (0DEh)
Reset Value = X000 0000b
Not bit addressable
Number
Bit
7
-
7
6
5
4
3
2
1
0
Mnemonic Description
ECOMn
ECOMn
CAPPn
CAPNn
PWMn
TOGn
MATn
CCF0
Bit
6
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
Enable Comparator
Cleared to disable the comparator function.
Set to enable the comparator function.
Capture Positive
Cleared to disable positive edge capture.
Set to enable positive edge capture.
Capture Negative
Cleared to disable negative edge capture.
Set to enable negative edge capture.
Match
When MATn = 1, a match of the PCA counter with this Module's
compare/capture register causes the CCFn bit in CCON to be set, flagging an
interrupt.
Toggle
When TOGn = 1, a match of the PCA counter with this Module's
compare/capture register causes theCEXn pin to toggle.
Pulse Width Modulation Mode
Cleared to disable the CEXn pin to be used as a pulse width modulated output.
Set to enable the CEXn pin to be used as a pulse width modulated output.
Enable CCF Interrupt
Cleared to disable compare/capture flag CCFn in the CCON register to generate
an interrupt.
Set to enable compare/capture flag CCFn in the CCON register to generate an
interrupt.
CAPPn
5
CAPNn
4
MATn
3
TOGn
2
PWMn
1
4180E–8051–10/06
ECCFn
0