PIC18F4610-E/PT Microchip Technology, PIC18F4610-E/PT Datasheet - Page 13

• Manufacturer Part Number: PIC18F4610-E/PT
• Description: IC MCU FLASH 32KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4610-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

42. Module: MSSP
EXAMPLE 6:
43. Module: Reset
© 2007 Microchip Technology Inc.
When the MSSP is configured for SPI mode, the
Buffer Full Status bit, BF (SSPSTAT<0>), should
not be polled in software to determine when the
transfer is complete.
Work around
Copy the SSPSTAT register into a variable and
perform the bit test on the variable. In Example 6,
SSPSTAT is copied into the working register
where the bit test is performed.
A second option is to poll the Master Synchronous
Serial Port Interrupt Flag bit, SSPIF (PIR1<3>).
This bit can be polled and will set when the transfer
is complete.
Date Codes that pertain to this issue:
All engineering and production devices.
This version of silicon does not support the func-
tionality described in Note 1 of parameter D002 in
Section 25.1 “DC Characteristics: Supply
Voltage” of the data sheet. The RAM content may
be altered during a Reset event if following
conditions are met.
• Device is accessing RAM.
• Asynchronous Reset (i.e., WDT, BOR or MCLR
Work around
None
Date Codes that pertain to this issue:
All engineering and production devices.
loop_MSB:
occurs when a write operation is being
executed (start of a Q4 cycle).
MOVF
BTFSS
BRA
SSPSTAT, W
WREG, BF
loop_MSB
PIC18F2515/2610/4515/4610
44. Module: 10-Bit Analog-to-Digital (A/D)
When the A/D clock source is selected as 2 T
or RC (when ADCS2:ADCS0 = 000 or x11), in
extremely rare cases, the E
Error) and E
exceed the data sheet specification at codes 511
and 512 only.
Work around
Select a different A/D clock source (4 T
8 T
selecting the 2 T
Date Codes that pertain to this issue:
All engineering and production devices.
OSC
, 16 T
Converter Module
OSC
DL
OSC
(Differential Linearity Error) may
, 32 T
or RC modes.
OSC
, 64 T
IL
(Integral Linearity
DS80199E-page 13
OSC
) and avoid
OSC
OSC
,