PIC16C662-20/L Microchip Technology, PIC16C662-20/L Datasheet - Page 74

• Manufacturer Part Number: PIC16C662-20/L
• Description: IC MCU OTP 4KX14 COMP 44PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C662-20/L

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, LED, POR, WDT
• Number Of I /o: 33
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-PLCC
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 176 B
• Interface Type: RS- 232
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 8
• Operating Supply Voltage: 3 V to 6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit
• For Use With: DVA16XL441 - ADAPTER DEVICE ICE 44PLCC309-1040 - ADAPTER 44-PLCC ZIF TO 40-DIP309-1039 - ADAPTER 44-PLCC TO 40-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC16C64X & PIC16C66X
10.1
The PIC16C64X & PIC16C66X’s orthogonal instruction
set allows read and write of all file registers, including
special function registers. There are some special situ-
ations the user should be aware of:
10.1.1
If an instruction writes to STATUS, the Z, C, and DC bits
may be set or cleared as a result of the instruction and
overwrite the original data bits written. For example,
executing CLRF STATUS will clear register STATUS,
and then set the Z bit leaving 0000 0100b in the reg-
ister.
10.1.2
Read, write or read-modify-write on PCL may have the
following results:
Read PC:
Write PCL:
Read-Modify-Write:
Where PCH = program counter high byte (not an
addressable register), PCLATH = Program counter
high holding latch, dest = destination, WREG or f.
10.1.3
All bit manipulation instructions are done by first read-
ing the entire register, operating on the selected bit and
writing the result back (read-modify-write). The user
should keep this in mind when operating on special
function registers, such as ports.
DS30559A-page 74
Special Function Registers as
Source/Destination
STATUS AS DESTINATION
PCL AS SOURCE OR DESTINATION
BIT MANIPULATION
PCL
PCLATH
8-bit destination value
PCL
PCLATH
8-bit result
ALU operand
dest
PCH;
PCH;
PCL
PCL
1996 Microchip Technology Inc.