DS5000FP-16+ Maxim Integrated Products, DS5000FP-16+ Datasheet - Page 2

• Manufacturer Part Number: DS5000FP-16+
• Description: IC MODULE MICRO 16MHZ 80-QFP
• Manufacturer: Maxim Integrated Products
• Series: DS500xr

Specifications of DS5000FP-16+

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SIO, UART/USART
• Peripherals: Power-Fail Reset, WDT
• Number Of I /o: 32
• Program Memory Type: SRAM
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4.75 V ~ 5.25 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-MQFP, 80-PQFP
• Processor Series: DS5000
• Core: 8051
• Data Bus Width: 8 bit
• Program Memory Size: 8 KB to 64 KB
• Data Ram Size: 8 KB to 64 KB
• Interface Type: 3-Wire, RS-232, UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 2
• Operating Supply Voltage: 4.75 V to 5.25 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: DS5000TK
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

DS5000FP
DESCRIPTION
The DS5000FP Soft Microprocessor Chip is an 8051-compatible processor based on NV RAM
technology. It is substantially more flexible than a standard 8051, yet provides full compatibility with the
8051 instruction set, timers, serial port, and parallel I/O ports. By using NV RAM instead of ROM, the
user can program and then reprogram the microcontroller while in-system. The application software can
even change its own operation, which allows frequent software upgrades, adaptive programs, customized
systems, etc. In addition, by using NV SRAM, the DS5000FP is ideal for data-logging applications and it
connects easily to a Dallas real-time clock for time stamp and date.
The DS5000FP provides the benefits of NV RAM without using I/O resources. It uses a nonmultiplexed
byte-wide address and data bus for memory access. This bus can perform all memory access and provides
decoded chip enables for SRAM. This leaves the 32 I/O port pins free for application use. The DS5000FP
uses ordinary SRAM and battery backs the memory contents with a user’s external lithium cell. Data is
maintained for over 10 years with a very small lithium cell. A DS5000FP also provides crash-proof
operation in portable systems or systems with unreliable power. These features include the ability to save
the operating state, Power-fail Reset, Power-fail Interrupt, and Watchdog Timer.
A user loads programs into the DS5000FP via its on-chip Serial Bootstrap Loader. This function
supervises the loading of code into NV RAM, validates it, and then becomes transparent to the user.
Software can be stored in an 8-kbyte or 32-kbyte CMOS SRAM. Using its internal Partitioning, the
DS5000FP will divide this common RAM into user programmable code and data segments. This
Partition can be selected at program loading time, but can be modified anytime later. It will decode
memory access to the SRAM, communicate via its byte-wide bus and write-protect the memory portion
designated as ROM. Combining program and data storage in one device saves board space and cost. The
DS5000FP can also access a second 32 kbytes of NV RAM but this area is restricted to data memory. The
DS2250(T) and DS5000(T) are available for a user who wants a pre-constructed module using the
DS5000FP, RAM, lithium cell, and optional real-time clock. Each device is described in separate data
sheets, available on our website at www.maxim-ic.com/microcontrollers. More details are contained in
the Secure Microcontroller User’s Guide.
2 of 22