SAK-XC866-2FRI BE Infineon Technologies, SAK-XC866-2FRI BE Datasheet - Page 77
![no-image](/images/manufacturer_photos/0/3/327/infineon_technologies_sml.jpg)
SAK-XC866-2FRI BE
Manufacturer Part Number
SAK-XC866-2FRI BE
Description
IC MCU 8BIT FLASH 38-TSSOP
Manufacturer
Infineon Technologies
Series
XC8xxr
Datasheet
1.SAF-XC866-2FRI_BC.pdf
(116 pages)
Specifications of SAK-XC866-2FRI BE
Program Memory Type
FLASH
Program Memory Size
8KB (8K x 8)
Package / Case
38-TSSOP
Core Processor
XC800
Core Size
8-Bit
Speed
86MHz
Connectivity
SSI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
19
Ram Size
768 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Data Bus Width
8 bit
Data Ram Size
768 B
Interface Type
JTAG/SPI/SSC/UART
Maximum Clock Frequency
26.67 MHz
Number Of Programmable I/os
19
Number Of Timers
3
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
8-ch x 10-bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
SP000245783
The break must contain a dominant value of 13 bits or more to ensure proper
synchronization of slave nodes.
In the LIN communication, a slave task is required to be synchronized at the beginning
of the protected identifier field of frame. For this purpose, every frame starts with a
sequence consisting of a break field followed by a synch byte field. This sequence is
unique and provides enough information for any slave task to detect the beginning of a
new frame and be synchronized at the start of the identifier field.
Upon entering LIN communication, a connection is established and the transfer speed
(baud rate) of the serial communication partner (host) is automatically synchronized in
the following steps:
Note: Re-synchronization and setup of baud rate are always done for every Master
Data Sheet
STEP 1: Initialize interface for reception and timer for baud rate measurement
STEP 2: Wait for an incoming LIN frame from host
STEP 3: Synchronize the baud rate to the host
STEP 4: Enter for Master Request Frame or for Slave Response Frame
Request Header or Slave Response Header LIN frame.
73
Functional Description
V1.2, 2007-10
XC866