MC912DG128CCPVE Freescale Semiconductor, MC912DG128CCPVE Datasheet - Page 129

• Manufacturer Part Number: MC912DG128CCPVE
• Description: IC MCU 16BIT 128K FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912DG128CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 69
• Eeprom Memory Size: 2KB
• Ram Memory Size: 8KB
• Cpu Speed: 8MHz
• No. Of Timers: 1
• No. Of Pwm Channels: 4
• Rohs Compliant: Yes
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: CAN, I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 8 Channel)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MC68HC912DT128A — Rev 4.0
MOTOROLA
NOTE:
FPOPEN — Opens the Flash Block for Program or Erase
EESWAI — EEPROM Stops in Wait Mode
The EESWAI bit should be cleared if the WAIT mode vectors are
mapped in the EEPROM array.
PROTLCK — Block Protect Write Lock
DMY— Dummy bit
Loaded from SHADOW word at reset. Read anytime. Write anytime
in special modes (SMODN=0). Write once ’0’ is allowed in normal
mode.
Read and write anytime.
Read anytime. Write once in normal modes (SMODN = 1), set and
clear any time in special modes (SMODN = 0).
Read and write anytime.
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = The whole Flash array is protected.
1 = The whole Flash array is enable for program or erase.
0 = The module is not affected during WAIT mode
1 = The module ceases to be clocked during WAIT mode
0 = Block protect bits and bulk erase protection bit can be written
1 = Block protect bits are locked
Go to: www.freescale.com
EEPROM Memory
EEPROM Control Registers
EEPROM Memory
Technical Data
129