C8051F018-GQR Silicon Laboratories Inc, C8051F018-GQR Datasheet - Page 153

• Manufacturer Part Number: C8051F018-GQR
• Description: IC 8051 MCU 16K FLASH 64TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F018r

Specifications of C8051F018-GQR

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Processor Series: C8051F0x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1.25 KB
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 2.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F005DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

19.3.
Each MCU has on-chip JTAG and debug circuitry that provide non-intrusive, full speed, in-circuit debug using the
production part installed in the end application using the four pin JTAG I/F. Silicon Laboratories’ debug system
supports inspection and modification of memory and registers, setting breakpoints, watchpoints, single stepping,
and run and halt commands. No additional target RAM, program memory, or communications channels are
required. All the digital and analog peripherals are functional and work correctly (remain in sync) while debugging.
The WDT is disabled when the MCU is halted during single stepping or at a breakpoint.
The C8051F015DK is a development kit with all the hardware and software necessary to develop application code
and perform in-circuit debugging with the C8051F018/9.
Environment (IDE) which has a debugger and integrated 8051 assembler. It has an RS-232 to JTAG protocol
translator module referred to as the EC. There is also a target application board with a C8051F015 installed and
with a large prototyping area. The kit also includes RS-232 and JTAG cables, and wall-mount power supply.
153
C8051F018
C8051F019
Debug Support
Rev. 1.2
Each kit includes an Integrated Development