STR710FZ2H6 STMicroelectronics, STR710FZ2H6 Datasheet - Page 49

• Manufacturer Part Number: STR710FZ2H6
• Description: MCU 32BIT 256KB FLASH 144-LFBGA
• Manufacturer: STMicroelectronics
• Series: STR7r

Specifications of STR710FZ2H6

• Core Processor: ARM7
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, HDLC, I²C, SmartCard, SPI, UART/USART, USB
• Peripherals: PWM, WDT
• Number Of I /o: 48
• Program Memory Size: 256KB (256K x 8 + 16K)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: STR710x
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: CAN, EMI, USB
• Maximum Clock Frequency: 66 MHz
• Number Of Programmable I/os: 48
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWARM, EWARM-BL, MCBSTR7, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: STR710-SK/HIT, STR711-SK/IAR, STR712-SK/IAR, STR71X-SK/RAIS, STX-PRO/RAIS, STX-RLINK, STR79-RVDK/CPP, STR79-RVDK, STR79-RVDK/UPG
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 4 Channel
• For Use With: MCBSTR7UME - MCBSTR7 + ULINK-ME DEV KITMCBSTR7 - BOARD EVAL STM STR71X SERIES497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU497-4516 - BOARD EVAL FOR STR71X SER MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5642

STR71xF
Table 27.
Notes:
1. Data based on characterization results, not tested in production.
Static and dynamic latch-up
●
●
Electrical sensitivities
Table 28.
1. Class description: A Class is an STMicroelectronics internal specification. All its limits are higher than the
V
V
V
Symbol
Symbol
ESD(CDM)
ESD(HBM)
ESD(MM)
JEDEC specifications, that means when a device belongs to Class A it exceeds the JEDEC standard. B
Class strictly covers all the JEDEC criteria (international standard).
DLU
LU
LU: 3 complementary static tests are required on 10 parts to assess the latch-up
performance. A supply overvoltage (applied to each power supply pin) and a current
injection (applied to each input, output and configurable I/O pin) are performed on each
sample. This test conforms to the EIA/JESD 78 IC latch-up standard. For more details,
refer to the application note AN1181.
DLU: Electro-Static Discharges (one positive then one negative test) are applied to
each pin of 3 samples when the micro is running to assess the latch-up performance in
dynamic mode. Power supplies are set to the typical values, the oscillator is connected
as near as possible to the pins of the micro and the component is put in reset mode.
This test conforms to the IEC1000-4-2 and SAEJ1752/3 standards. For more details,
refer to the application note AN1181.
Electro-static discharge voltage
(Human Body Model)
Electro-static discharge voltage
(Machine Model)
Electro-static discharge voltage
(Charge Device Model)
Static latch-up class
Dynamic latch-up class
ESD absolute maximum ratings
Static and dynamic latch-up
Parameter
Ratings
T
T
T
V
T
A
A
A
A
DD
=+25°C
=+85°C
=+105°C
=+25°C
=3.3 V, f
T
A
OSC4M
=+25°C
Conditions
Conditions
=4 MHz, f
MCLK
=32 MHz,
Electrical parameters
750 on corner
pins, 500 on
Maximum
value
others
2000
200
1)
Class
A
A
A
A
Unit
(1)
49/78
V