CY8CLED16P01-28PVXIT Cypress Semiconductor Corp, CY8CLED16P01-28PVXIT Datasheet - Page 16

• Manufacturer Part Number: CY8CLED16P01-28PVXIT
• Description: IC PLC PSOC CMOS LED 16CH 28SSOP
• Manufacturer: Cypress Semiconductor Corp
• Series: PowerPSoC® CY8CLEDr

Specifications of CY8CLED16P01-28PVXIT

• Package / Case: 28-SSOP
• Core Processor: M8C
• Core Size: 8-Bit
• Speed: 24MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: LED, PLC, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.75 V ~ 5.25 V
• Data Converters: A/D 4x14b; D/A 4x9b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Operating Supply Voltage: 4.75 V to 5.25 V
• Maximum Supply Current: 8 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

6.5 PLC User Modules
The CY8CLEDP01 has the Powerline Transceiver (PLT) User
Module in PSoC Designer 5.0 SP5 or later. The PLT User Module
(UM) enables data communication over powerlines up to baud
rates of 2400 bps. This UM also exposes all the APIs from the
network protocol for ease of application development. The UM,
when instantiated, provides the user with three implementation
modes:
■
Refer to the application note
CY8CPLC20/CY8CLED16P01
determine
CY8CLED16P01 chip with the PLT User Module, loaded along
with the other User Modules.
6.1 Intelligent Lighting User Modules
The CY8CLED16P01 has the intelligent lighting control user
modules along with the PLC user modules. These user modules
enable the user to do the following:
Document Number: 001-49263 Rev. *E
FSK Modem Only – This mode enables the user to use the
raw FSK modem and build any network protocol or application
with the help of the APIs generated by the modem PHY.
the
power
consumption
Power
AN55403
Consumption"
estimate
- "Estimating
Figure 6-1. PLT User Module
of
the
to
■
■
Figure 6-1.
three implementation modes from which the user can choose.
■
■
■
■
■
FSK Modem + Network Stack – This mode allows the user to
use the Cypress network protocol for PLC and build any appli-
cation with the APIs provided by the network protocol.
FSK Modem + Network Stack + I2C – This mode allows the
user to interface the CY8CLEDP01 with any other microcon-
troller or PSoC device. Users can also split the application
between the PLC device and the external microcontroller. If the
external microcontroller is a PSoC device, then the I2C UMs
can be used to interface it with the PLC device.
Control multiple channels, anywhere between 1 and 16.
Enable temperature compensation and color feedback
Provide algorithms for high CRI
Control color with 1931 or 1976 gamuts and through CCT
Provide additional communication interfaces such as DALI and
DMX512
shows the starting window for the PLT UM with the
CY8CLED16P01
Page 16 of 46
[+] Feedback
[+] Feedback